Advertisement
How to connect 2.5" S-ATA HDD
1. Prepare HDD at MASTER mode.
Set HDD in MASTER mode.
As for 2.5 inches HDD, leave the two pins at the left side nothing stuck.
2. Connect cables (for 2.5"HDD) to HDD
Connect the flat cables to HDD. Please be careful that you are connecting the
cables in correct direction.
As pushing the cables forcibly may cause trouble of the machine, please handle
them carefully.
3. Connect the power supply cable and the flat cables into the main body of
KD25/35PRO
[Caution (attention!)]
Please be careful not to cut your hand with the edge of an HDD.
9
Advertisement
