Drainage; Drain Valve; Drain Pump; Possible Connections - Miele PW 6065 Plus Operating Manual

The machine is drained with a
motorized drain valve. A connection
can be made to an on-site floor drain
(gully with an air gap) on an angle.
The wash water is drained using a
pump with a 3 ft (1 m) delivery height.
Make sure there are no kinks in the
drain hose. The elbow on the end of the
drain hose can be turned or removed if
necessary.
over the edge of the sink and secure
it firmly (e.g. by tying the hose to the
water faucet).
1
hose into a 1 /
and secure it firmly.
equipped with an air gap/
anti-siphoning system so that no
minimum drain height is required.
Hook the hose
Place the drain
" (4 cm) stand pipe
2
The machine is
If necessary the drain hose can be
extended up to 16' 5" (5 m). The hose
extension can be purchased from your
Miele dealer or Miele.
The drain pump must be replaced for
drain heights over 3 ft (1 m). The
maximum allowable drain height is 5 ft
11 in (1.8 m). A stronger pump for
these heights can be purchased from
your dealer or Miele.
53