Advertisement
The machine must only be operated
with the voltage, frequency and fusing
shown on the data plate located on the
rear of the machine, and on the plinth
(behind the service panel).
The
is secured to the inner
side of the service panel.
48
^ Remove the fixing screws, a, from
^ Take hold of the service panel at both
^ Unscrew plinth facing (screws b).
^ Remove plastic protective cap.
^ Replace the plastic protective cap,
^ See the supplied installation diagram.
and the
,
Disconnect the machine from the
main electrical supply.
the service panel.
sides and pull upwards.
plinth facing and service panel in the
reverse order.
Advertisement
