Advertisement
Each machine can be supplied with a
5 m long interface cable for data
transfer between the Profitronic system
and an external report printer or PC.
The serial interface is RS 232
compatible.
Various printers can be used as
external printers:
– Epson-compatible sign-set
– HP LaserJet
For the interface configurations see
"PC/Printer Function" in the
"Programming Manual".
The address of the 9-pole pin sub-D
plug of the serial interface cable:
5GND (ground)
3TXD (transmit)
2RXD (receive)
1-4-6 (linked)
7-8 (linked)
A standard null-modem or LapLink
cable can be connected.
The extension cable to the printer/PC
must not exceed 13 m.
Please note the following when
connecting a printer or PC:
– Only use an industry-standard PC or
printer.
– When installing the machine take the
dimensions of the printer/PC into
account.
The report print-out documents the
time along with the:
– Date and machine number,
– Program start (with program place
and program name),
– Dispensing system with dispensing
temperature and dispensing
concentration for each program
block,
– Effective time successfully
completed with required temperature
reached and time for each program
block,
– Achieved temperature and time of
day required in the drying sequence
– All faults (e.g. water inlet blocked),
– All manual interventions (start, stop,
interruptions to power supply),
– Program end.
31
Advertisement
