Makita 9032 Instruction Manual page 8

001221
2. Hose28
3. Hose of vacuum cleaner
4. Vacuum cleaner
00122
Connecting to Makita vacuum cleaner or dust col-
lector
A
CAUTION:
Always close the nozzle cap when the vacuum cleaner/
dust collector is not connected to the nozzle. Never
insert your finger into the nozzle.
Cleaner sanding operations can be performed by connecting
the belt sander to Makita vacuum cleaner
or
dust collector.
Open the nozzle cap, and install the dust nozzle. Connect
the hose of a vacuum cleaner/dust collector to the dust noz-
zle.
When connecting to Makita vacuum cleaner, an optional
hose 28 mm (1-1/8") in inner diameter is necessary.
When connecting to Makita dust collector, connect the hose
of the dust collector directly to the dust nozzle.
. Dust nozzle
2. Hose28
3.
Dust collector
8