Samsung HW-H570 User Manual page 16

functions
To connect the Soundbar to a Bluetooth device
Check if the Biuetooth device supports the Biuetooth compliant stereo headset function_
@
@
e Connect
@
@
Bluetooth device
1
Press the SOURCE button on the remote control of the Soundbar to display the BT message_
• You will see BT READY on the front disp ay of the SoundbaL
Z On the B[uetooth device you want to connect, open the B[uetooth menu_ (Refer to the B[uetooth device's
user manuaL)
3_Select the Stereo headset menu on the B[uetooth device_
• You will see a i[st of scanned devices_
4_ Select "'[Samsung] Soundba¢ from the iisL
• When the Soundbar is connected to the B uetooth device, it will disp ay Device name '_ BT on the front disp ay_
• If the Bluetooth device has failed to pair with the Soundbar, delete the previous "[Samsung] SoundbaP found by
the Biuetooth device and have it search for the Soundbar again_
• If the Soundbar is in another mode (except TV mode), you can shift it to Biuetooth mode using your smart
device_
5_ Piay music on the connected device_
• You can isten to the music paying on the connected B uetooth device over the Wire ess Audio o Soundbar
system_
• In BT mode, Repeat functions are not availab e_ Forsome B uetooth device, PayiStopiNextiPrev function are not
availabie_
You may be required to enter a PIN code (password) when connecting the B[uetooth device to the
SoundbaL If the PIN code input window appears, enter (0000}_
The Soundbar supports SBC data (44_i kHz, 48kHz)_
The AVRCP feature is supported_
Connect only to a B[uetooth device that supports the A2DP (AV) function_
You cannot connect to a B[uetooth device that supports only the HF (Hands Free) function_
Only one B[uetooth device can be paired at a time_
Once you have turned off the Soundbar and the pairing is disconnected, the pairing wi[[ not be
restored automatica[[y_ To reconnect, you must pair the device again_
The Soundbar may not run the B[uetooth Search or Connection functions propedy in the following
cases:
If there is a strong electrical field around the Soundbar_
If several B[uetooth devices are simultaneously paired with the SoundbaL
If the B[uetooth device is turned off, not in place, or maffunctions_
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas
stoves use the same frequency range as the B[uetooth device, which can cause electric interference_
Once paired the device,on ARC!DIN!USBiHDMIiAUX mode,se ect "[Samsung] Soundbar" from the ist
wi[[ automatically change to BT mode_
16