Install The Riser Cards - Vand A170 User Manual

III Hardware Installation
3-3-5 Install the Riser Cards (Option)
Screw type: Round-headed mounting screws for riser card.
The riser cards (AGP riser card / PCI Express riser card / PCI riser card) allow you
to plug the VGA graphic card, PCI Express graphic card and PCI cards into the
mainbaord of the system.
Caution:
Before adding or removing extension cards, make sure to turn off the power first.
Note:
Please refer to the user's manual provided by the extension card vendor to make any
necessary hardware or software settings.
VGA Graphic Card Installation
1. Insert AGP riser card to the AGP
slot on the mainboard.
2. Remove the slot cover from the
system case in the space where
the AGP slot to be used.
3. Press the VGA card firmly into the
slot of AGP riser card. Then insert
any screws provided to secure the
VGA card with the system plate.
.
- 17 -