Installation Flowchart - Vand A170 User Manual

III Hardware Installation

3-2 Installation Flowchart

(1) Start
(2) Remove Back Chassis
Cover
(3) Mount Hard Disk Drive
(4) Mount Mainboard
(5) Install CPU, CPU Fan,
Memory Module
Note:
Please refer to the installation
procedure in the user's manual
provided by the mainboard
vendor
(6) Connect Mainboard
Audio Cables to activate
Line-out / Mic-in jack on the
rear o f the s ystem
(
7) Connect Other Cables
(Optical Drive, Audio, HDD,
USB, Reset, HDD LED,
Power LED, Power On.)
Note:
Please refer to the installation
procedure in the user's manual
provided by the mainboard
vendor.
(8) Install Riser Cards (option)
(9) Connect VGA & Touch
Panel (Optional) Cables
(10) Check If All Parts Are
Properly Connected
(11) Replace Back Chassis
Cover
(12) Finish
- 12 -