1. Manuals
  2. Brands
  3. Vand Manuals
  4. Desktop
  5. A170
  6. User manual

Vand A170 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
TRADEMARKS
Intel and Pentium are registered trademarks of Intel Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation. DOS,
Windows 95/98/ME/ 2000/NT/XP are trademarks of Microsoft Corporation.
All other brand names mentioned in this manual are trademarks and/or registered
trademarks of their respective owners/companies.

Advertisement

Table of Contents
loading

Summary of Contents for Vand A170

  • Page 1 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2 WARNING AND DISCLAIMER This manual is designed to provide information about the product. Efforts have been made to make this manual as accurate as possible, but no warranty of fitness is implied. All the information is provided on an “as is” basis. The author and his corresponding publishing company shall have neither liability nor responsibility to any person or entity with respect to any loss or damages arising from the information contained in this manual or from the use of the product that...
  • Page 3 Important Safeguard Safety Instruction Read Instructions — All the safety and operation instructions should be read before operating the system Retain Instructions — The safety and operating instructions should be retained for future reference. Heed Warnings — All warnings on the appliance and in the operating instructions should be heeded.
  • Page 4 Important Safeguard 19. Unplug the power cord before inserting any add-on card or module. 20. Use power cord correctly. There are some important safety requirements. The power cord is equipped either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do not defeat the safety purpose of the third grounded plug.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS I. Introduction 1-1 Product Specifications 1-2 Package Contents II. Product Overview 2-1. Front View 2-2. Rear View 2-3. Right side View 2-4. Left side View 2-5. Bottom View 2-6. System Layout 2-7. Chassis III. Hardware Installation 3-1. Prepare to Install 3-1-1 Installation Tools 3-1-2 Packing Checklist for Installation 3-2.

  • Page 6: Introduction

    Introduction 1-1 Product Specifications Followed by the intelligent "Easy Assemble” system design, this LCD PC barebone can be easily configured by the desktop PC components. It gives users the freedom to install the standard P4 mATX mainboard into an all-in-one LCD PC in seconds.

  • Page 7: Package Contents

    Introduction Package Contents LCD PC Barebone User Manual Power Cord PCI-E Riser Card PCI Riser Card AGP Riser Card Screws Note: These pictures are for reference only, and may not reflect the exact contents of the package. After removing the barebone system from the package, check to see if there is anything visibly wrong with it.

  • Page 8: Product Overview

    Product Overview 2-1 Front View (1) LCD Display Panel (2) Build-in Speaker (3) LED Indicator (4) Tilt Stand (1) LCD Display Panel This system product equipped the 17 / 19 inches liquid crystal display with SXGA standard. (2) Build-in Speaker The two 5W build-in speakers on two sides output powerful stereo sound.

  • Page 9: Rear View

    Product Overview 2-2 Rear View (1) VESA Wall Mount Hole (2) Ventilation Openings (3) 2 x USB 2.0 Ports (4) Line-out / Mic-in Jack (5) Drawable sub-stand (1) VESA Wall Mount Hole The holes for standard 10cm VESA wall mount keep the system mount on the wall easily and firmly.

  • Page 10: Right Side View

    Product Overview 2-3 Right Side View (1) Ventilation Openings (2) Function Keys (3) Multi-in-One Card Reader (1) Ventilation Openings Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the system, and to protect it from overheating. (2) Function Keys Power Key: Turn the System and LCD Panel on or off.

  • Page 11: Left Side View

    Product Overview Note: Please refer to Chapter IV LCD Panel Monitor for more information of functional control. (3) Multi-in-One Card Reader This card reader is multi-in-one type includes 1x USB port, 1x Compact Flash, 1x Memory Stick, 1x Smart Media, and 1x Secure Digital slots. It supports USB Revision 2.0, Compact Flash I / II, IBM Micro drive, Smart media, Secure Digital, Mini SD, Multi Media Card, RS-MMC, Memory Stick, MS-Pro, MS-Duo, MS-Pro Duo, MS-magic Gate, excellent Digital.

  • Page 12: Bottom View

    Product Overview 2-5 Bottom View (3) Power Socket (2) Fan Grill (5) Extension Brackets (4) Mainboard I/O Ports (1) Voltage Switch (1) Voltage Switch The manual select switch needs to be adjusted based on the different AC Input. AC Input Voltage: 100 - 127V ~/5A 60 Hz; 200 - 240V ~/3A 50 Hz. (2) Fan Grill The fan grill is where hot air is expended.
  • Page 13 Product Overview PS/2 Mouse Port The green 6-pin mini DIN connector is to connect a PS/2 mouse. PS/2 Keyboard Port The purple 6-pin mini DIN connector is to connect a PS/2 Keyboard. LAN Jack The RJ-45 jack conforms to 10Base-T and 100Base-TX transmission protocols and can connect to Local Area Network (LAN).

  • Page 14: System Layout

    Product Overview (5) Extension Brackets The two brackets are where the extension cards were fixed to. 2-6 System Structure (1) Hard Disk Drive (2) System Fan (3) Mainboard (4) Power Supply (1) Hard Disk Drive The Hard Disk Drive is 3.5” Height, ATA-33/66/100 Ultra DMA desktop PC type. (2) System Fan cm, 3000 spin fan The System Fan is a 5...

  • Page 15: Chassis

    Product Overview Caution: Check to ensure that power switch has been switched to the correct power voltage before using. The incorrect voltage source may cause tremendous damages to the system and users. Consult your local engineer for assistance if necessary. 2-7 Chassis All aluminum super durable chassis.

  • Page 16: Hardware Installation

    Hardware Installation This chapter provides you the details for the installation procedures of the Mainboard, Hard Disk Drive, and the Extension cards of the LCD PC Barebone. Please be reminded to check the hardware setup of the mainboard, Hard Disk Drive and extension cards from the user’s manuals provided by vendors of those components before assembling the barebone.

  • Page 17: Installation Flowchart

    Hardware Installation 3-2 Installation Flowchart (1) Start 7) Connect Other Cables (Optical Drive, Audio, HDD, USB, Reset, HDD LED, Power LED, Power On.) Note: (2) Remove Back Chassis Cover Please refer to the installation procedure in the user’s manual provided by the mainboard vendor.

  • Page 18: Installation Procedures

    Hardware Installation 3-3 Installation Procedures 3-3-1 Remove Back Chassis Cover Place the sponge on the platform to protect the LCD panel. Then place the system barebone face down the sponge. 2. Remove the screws (8 pcs) to open the back cover. 3.

  • Page 19: Mount The Hard Disk Drive

    Hardware Installation 3-3-2 Mount the Hard Disk Drive Screw type: Mounting screws provided by the Hard Disk Drive vendor. 1. Discharge the HDD mounting plate from the system plate. Firmly screw the Hard Drive onto the HDD mounting plate. Firmly screw the set of HDD and mounting plate back to the system plate.

  • Page 20: Connect Mainboard Audio Cables

    Hardware Installation Place the mainboard on the system plate, aligning the mainboard mounting holes over the standoffs. Make sure the mainboard’s I/O connectors are aligned with the correct slots on the I/O shield plate of the system plate. Insert the mounting screws through the mainboard mounting holes into the standoffs and firmly screw secure.

  • Page 21: Connect All Other Cables

    Hardware Installation Connect mainboard’s audio cable built on the system plate to the audio connector on the mainboard. Then the Line-out / Mic-in jack on the rear of the system can be activated. 3-3-5 Connect All other Cables Connect the other cables on the system plate to the mainboard including Optical Drive Audio, HDD, USB, Reset, HDD LED, Power LED, and Power On.

  • Page 22: Install The Riser Cards

    Hardware Installation 3-3-5 Install the Riser Cards (Option) Screw type: Round-headed mounting screws for riser card. The riser cards (AGP riser card / PCI Express riser card / PCI riser card) allow you to plug the VGA graphic card, PCI Express graphic card and PCI cards into the mainbaord of the system.
  • Page 23 Hardware Installation PCI Express Graphic Card Installation Insert PCI Express riser card to the PCI Express graphic slot on the mainboard. Remove the slot cover from the system case in the space where the PCI Express slot to be used. Press the PCI Express graphic card firmly into the slot of PCI Express riser card.
  • Page 24 Hardware Installation PCI Card Installation Insert PCI riser card to the second PCI slot on the mainboard. Remove the slot cover from the system case in the space where the PCI slot to be used. Press the PCI card firmly into the slot of PCI riser card.

  • Page 25: Connect Vga Cable

    Hardware Installation 3-3-6 Connect VGA Cable Plug the VGA cable into to the video port of the mainboard to activate the monitor. 3-3-7 Finish the Installation Replace the back cover. Insert the screws (8 pcs) firmly to close the back cover. Finish the i nstallation.

  • Page 26: Lcd Panel Monitor

    LCD Panel Monitor 4-1 LCD Panel Monitor Specifications This LCD Panel Monitor is a 17” / 19” high-performance intelligent multi-scan TFT-LCD color monitor. By applying 8 bit digital data, 1280(H) × 1024(V), 16.2M-color (6Bit+FRC) images are displayed on the 17.0” diagonal screen. Input power voltage is 5.0V for LCD driving.

  • Page 27: Activate The Monitor

    LCD Panel Monitor 19” LCD panel specifications: ITEM Unit SPECIFICATION Active Area 376.32(H) x 301.056(V) 〔mm〕 Number of Pixels 1280(H) x 1024(V) Pixel Pitch 0.294(H) x 0.294(V) 〔mm〕 Color Pixel RGB vertical stripe Arrangement Display Mode Normally white Number of Colors 16.7M (RGB 8-bit data) ㎡...

  • Page 28: Display Adjustment

    LCD Panel Monitor Menu key: Enter main-menu and sub-menu. Auto key: Adjust vertical position, phase, horizontal position and pixel clock automatically. 4-3-2 Display Adjustment MAIN MENU Press ” Menu” key to enter “MAIN MENU”. The Control functions include Auto Setup, Brightness, Contrast, Display Adjust, Color Temperature, Language, OSD Display, Audio, Recall and Exit.
  • Page 29 LCD Panel Monitor Or in the main menu, choose “BRIGHTNESS”. Press “Menu” key to enter the sub-menu. Choose “Backlight” and press “ Menu” key again to show the level. Press “Up”/”Down” key to adjust the backlight level. The scale can be adjusted from maximum (127) to minimum (0).
  • Page 30 LCD Panel Monitor a. H. (Horizontal) POSITION: adjusts the horizontal position of the display. In the main menu, choose “DISPLAY ADJUST”. Press “ Menu” key to enter the sub-menu. Choose “H. POSITION” and press “ Menu” key again to show the position level.
  • Page 31 LCD Panel Monitor d. PHASE: adjusts the phase of pixel clock. In the main menu, choose “DISPLAY ADJUST”. Press “ Menu” key to enter the sub-menu. Choose “PHASE” and press “ Menu” key again to show the position level. Press “Up”/”Down” key to adjust the position level. The scale can be adjusted from maximum (31) to minimum (0).
  • Page 32 LCD Panel Monitor choose color (Red, Green, Blue). Press “ Menu” key again in the sub-menu to show color level. Press “Up”/”Down” key to adjust the color level. The scale can be adjusted from maximum (255) to minimum (0). Press “Menu” key to save the choice.
  • Page 33 LCD Panel Monitor b. OSD V-POS: adjusts OSD vertical position. In the main menu, choose “OSD DISPLAY”. Press “Menu” key to enter the sub-menu. Choose “OSD V-POS” and press “ Menu” key again to show the position level. Press “Up”/”Down” key to adjust the position level. The scale can be adjusted from maximum (174) to minimum (0).
  • Page 34 LCD Panel Monitor H. AUDIO: adjust speaker volume. In the main menu, choose “AUDIO”. Press “ Menu” key to enter the sub-menu Press “Up”/”Down” key to choose “Mute” or “Volume”. When choose “Mute”; press “ Menu” key to switch ON or OFF. When choose “VOLUME”, press “Menu”...

  • Page 35: Troubleshooting

    Troubleshooting When you encounter a problem, first try to go through the recommendations followings. If the error continues, contact your local dealer for service information. 1. Check to see if the problem persists when all the external devices are removed. 2.

This manual is also suitable for:

A190

Table of Contents