Using The Thermometer; Care And Maintenance; Troubleshooting - Clas Ohlson E0060 Owner's Manual

Switching the alarm off
• When the alarm sounds press SNOOZE once to temporarily switch the alarm off.
The alarm will then start sounding again after the set snooze time.
• To deactivate the alarm, press ALM 1 or ALM 2 respectively. ALM 1 or ALM 2
will then stop flashing in the display.
• The alarm will sound at the same time every day.

Using the thermometer

Reading the MAX/MIN temperature
• Press the MAX/MIN button to display the highest measured temperature.
• Press the MAX/MIN button again to display the lowest measured temperature.
To reset the max temperature
Press and hold in MAX/MIN to delete the old max temperature.
The thermometer shows "- -" and after a few moments it returns to normal mode.
To reset the min temperature
Press and hold in MAX/MIN to delete the old min temperature.
The thermometer shows "- -" and after a few moments it returns to normal mode.
Changing the light intensity of the display digits
Press SNOOZE to change the light intensity.

Care and maintenance

Use a soft damp cloth to clean the product. Never use strong solvents or cleaning agents.

Troubleshooting

The outdoor temperature is not displayed; only two lines appear on the display.
The wireless signal transmission is not working or is disrupted. Possible solutions:
• Press CLEAR once and then press RESET on the outdoor sensor to resynchronise
the sensor and indoor unit.
• Move the outdoor sensor closer to the indoor unit or to another location.
• Check the batteries of the outdoor sensor.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of how to
dispose of this product, please contact your municipality.
7