Download Print this page

Miele DA 229-2 Operating And Installation Instructions page 9

Ventilation system
Hide thumbs Also See for DA 229-2:

Advertisement

Press the main power switch to "I". The
fan and the lighting can now be oper-
ated.
If the appliance is not going to be used
for a long period of time (e.g. while va-
cationing) turn the appliance off by
pressing the main power switch to "0".
The next time it is turned on, the hood
will operate at the level previously used.
^ Press the On/Off button.
The fan runs at power level "2".
The On/Off indicator lights.
^ Use the pm controls to select the
desired power level.
p = increases the fan speed
m = decreases the fan speed
Level "1" to "3" (green indicators) are
usually sufficient for normal cooking.
Level "4" (yellow indicator) should be
used for a short period when frying or
cooking food with a strong aroma.
The maximum air flow capacity is
625 cfm. Factors such as narrow duct
diameter and bends will affect this
value.
Level 1 operates at 40% capacity
Level 2 operates at 60% capacity
Level 3 operates at 80% capacity
Level 4 operates at 100% capacity
If odors or smoke remain in the kitchen
after cooking has been completed, the
Delayed Shut Down feature can be se-
lected to allow the hood to continue
running for either 5 or 15 minutes.
^ Press the Delayed Shut Down button
while the fan is still running.
Press once = 5 minute delay
(left indicator lights)
Press twice = 15 minute delay
(right indicator lights)
To cancel the Delayed Shut Down fea-
ture press the button again.
9

Advertisement

loading