Advertisement
Gas cooking appliances release
carbon monoxide that can be harm-
ful or fatal if inhaled.
Please read and follow the
risk of personal injury. Follow all local
building codes when installing the
hood.
– The ducting should be as short and
straight as possible, and the number
of sharp bends should be minimized.
– For most efficient air extraction, the
diameter of the ductwork should not
be less than 6" (150 mm). Use of flat
ducts also reduces the air extraction
efficiency.
– Noise levels of the hood will increase
if flat ducts or round ducts of less
than 6" (150 mm) in diameter are
used.
36
– Use smooth or flexible pipes made
– Where the ductwork is horizontal, it
– If the exhaust is ducted through an
to reduce the
– If the exhaust is ducted into an inac-
from approved non-flammable mate-
rials for exhaust ducting.
must slope away from the hood at
1
least
/
" per foot (1cm per meter) to
8
prevent condensation dripping into
the appliance.
outside wall, a Miele Telescopic Wall
Vent can be used.
tive flue, the air must be expelled
parallel to the flow direction of the
flue.
Advertisement
