Download Print this page

Miele DA 229-2 Operating And Installation Instructions page 5

Ventilation system
Hide thumbs Also See for DA 229-2:

Advertisement

Do not use an extension cord to
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance, (e.g.
danger of overheating).
Do not install this hood over
cooktops burning solid fuel.
Any fittings, sealant, or materials
used to install the ductwork must
be made of approved non-flammable
materials.
Never connect an exhaust hood to
an active chimney, dryer vent, vent
flue, or room ventilating ductwork. Seek
professional advice before connecting
an exhaust hood vent to an existing, in-
active chimney or vent flue.
Make sure that the airflow in the
room is sufficient for combustion
and exhausting of all non-electric heat-
ing appliances (water heaters, gas
cooktops, gas ovens, etc.), otherwise
backdrafts may occur. Follow the heat-
ing manufacturer's guidelines and
safety standards or those published by
the National Fire Protection Association
(NFPA), or the American Society for
Heating, Refrigeration and Air Condi-
tioning Engineers (ASHRAE). If in
doubt, consult an experienced profes-
sional.
lid, cookie sheet, or metal tray, then
turn off the burner.
If the flames do not go out immediately,
You may be burned.
dishcloths or towels - a violent
steam explosion will result.
– You know you have a Class ABC ex-
tinguisher, and you already know
how to operate it.
– The fire is small and contained in the
area where it started.
– The fire department is being called.
– You can fight the fire with your back
to an exit.
The manufacturer cannot be held lia-
ble for damage caused by non-com-
pliance with these Warning and
Safety instructions.
with a close fitting
, including wet
5

Advertisement

loading