Nvmem Memory Test; Load Timing/Voltage Set; Save Timing/Voltage Set; System Bios Cacheable - Zotac nForce 790i-Supreme User Manual

Configuring the BIOS

NVMEM Memory Test

This function defines whether you run the NVIDIA memory testing module during
POST. The options are Fast, Medium, Slow, and Disable.

Load Timing/Voltage Set

This function loads the system voltages and timing settings that were defined in
the System Voltages menu. You can set up to four profile settings using the Save
timing/voltage set function.
There are four profile options that can be loaded. The default setting is Auto for all
settings. Press Enter to see the options.

Save Timing/Voltage Set

This function saves the system voltages and timing settings that were defined in the
System Voltages menu. There are four profile options that can be loaded. The default
setting is Auto for all settings. Press Enter to see the options.

System BIOS Cacheable

This function allows you to enable or disable caching the system BIOS.

HPET Function

This function allows you to enable or disable the High Precision Even Timer (HPET).
When Enabled, HPET is used as the timing hardware for multimedia and other time-
sensitive application. When HPET is Disabled, the APIC timer is used.

NVIDIA GPU Ex

To enable or disable this function you need to have the NVIDIA® ForceWare® graphics
driver with NVIDIA EX support. When enabled, the system uses the optimized NVIDIA
EX graphics driver.