Table of Contents
Advertisement
2) Place the refrigerator in a ventilated place, away from flammable material, to be provided by high-
temperature heaters, fireplaces and other sources of heat, direct sunlight, humidity and dust (see Figure 2).
3) Place the cooler on a stand or on the floor perfectly flat! (see fig.3).
4) Place the refrigerator for a minimum distance from walls that can become clogged air circulation! attention
to the positioning of the machine inside the mobile support of the aquarium. support should be open or be
equipped with forced ventilation with electric fans. (see fig.4).
5) Do not cover the refrigerator and do not try to move it when it is running.
(see fig.5).
6) The refrigerator is not equipped with pump, therefore needs to be connected to an immersion pump or a
filter outside.
In any case, the prevalence of the pump should not exceed 8mt, otherwise the machine could be damaged
irreparably. (see fig.6).
7) Do not turn the bars or refrigerator. Should this happen accidentally wait at least 20 minutes before you
turn it on. (see fig.7).
C) TIPS FOR INSTALLATION:
1) if you are not experts call a technician for installation.
2) connect directly to the condenser outlet with no put or triple multi taken.
3) The outlet must be accompanied by earth.
4) make sure that the outlet is adequate to withstand the power of the machine (see technical data on page
4, 5 and 6 under "power").
5) Do not connect the plug before you install the unit.
D) INSTALLATION METHOD:
As explained previously, the inlet must CONNECTED TO OPERATE pumps.
The refrigerator must not be fitted into a mobile closed. Should this be necessary, mount the electric fan for
the recirculation of air inside the cabinet INSTALLING THE GRID OF VENTILATION WITH AN AREA NOT
Hide quick links:
Advertisement
Table of Contents
