Miele KFN 9755 IDE Operating And Installation Instructions page 54

Installing the appliance
Securing the appliance to the
space
^ Push the hinged side of the
appliance to the cabinetry wall.
^ To secure the appliance at the top
and bottom to the cabinetry, screw
the long particle board screws
3/16" x 13/16" (4 x 20 mm) through
the upper and lower hinge flaps.
54
^ Slightly loosen the screws
upper and lower mounting brackets
.
^ Push the mounting brackets
against the cabinetry wall, and
tighten the screws
^ Using the screws
mounting brackets
cabinetry wall. You may wish to
pre-drill the holes in the cabinetry
wall.
^ Snap off the excess from the upper
cover and flip it over onto the
upper mounting bracket
^ Fit the long cover
mounting bracket
on the
back in.
, tighten the
into the
.
onto the upper
.