Miele KFN 9755 IDE Operating And Installation Instructions page 53

Installing the appliance
– For 5/8" (16 mm) cabinetry walls:
The spacers lie flush on the upper
and lower front edge of the cabinetry
side wall .
– For 3/4" (19 mm) cabinetry walls:
The front edges of the hinges above
and below are flush with the front
edge of the cabinetry side wall
^ Check again to see whether the
covers on the upper and lower
mounting brackets are lying on the
front edge of the cabinetry side wall
.
This will help to maintain a 1 5/8"
(42 mm) distance all the way around
from the front edges of the cabinetry
side walls.
Installing the appliance
For furniture with parts along the
door hinge (such as nubs, seals, etc.)
the installed dimensions of the hinge
parts must be taken into account, so
that a distance of 42 mm is maintained
all the way around.
^ Pull the appliance forward the
appropriate amount to suit the
installed dimensions.
The hinges and covers will now be
positioned to suit the dimensions.
Tip: Remove the door hinge parts. This
will allow the surrounding cabinetry
doors to lie flush.
If a circumferential distance of 1 5/8"
(42 mm) (from the body of the
appliance to the front side of the
cabinetry side wall) is not
maintained, the appliance door may
not close properly.
This can cause icing, condensation
and malfunctions.
^ Use the fork wrench to adjust the feet
as needed, so that the appliance is
level .
.
53