Geo 1995 Prizm Owner's Manual page 243

Weatherstrips
Silicone grease on weatherstrips will make them last
longer, seal better, and not stick
or
squeak. Apply
silicone grease with a clean cloth at least every six
months. During very cold, damp weather more frequent
application may be required. (See "Recommended
Fluids and Lubricants" in the Index.)
Cleaning the Outside of Your Geo
The paint finish on your vehicle provides beauty, depth
of color, gloss retention and durability.
Washing Your Vehicle
The best way to preserve your vehicle's finish is to keep
it clean by washing it often with lukewarm or cold
water.
Don't wash
-
vehicle in the direct rays
of the sun.
Don't use
s&ng
soaps or chemical detergents. Use
liquid hand, dish or car washing (mild detergent) soaps.
Don't use cleaning agents that are petroleum based, or
that contain acid or abrasives. All cleaning agents
should be flushed promptly and not allowed to dry on
the surface, or they could stain. Dry the finish with a
soft, clean chamois or a 100% cotton towel to avoid
surface scratches and water spotting.
High pressure car washes may cause water to enter your
vehicle.
Finish Care
Occasional waxing or mild polishing of your Geo by
hand may be necessary to remove residue from the paint
finish. You can get GM approved cleaning products
from your dealer. (See "Appearance Care and Materials"
in the Index.)
Your Geo has a "ba~ec~at/clearc~at"
paint finish. The
clearcoat gives more depth and gloss to the colored
basecoat. Always use waxes and polishes that are
non-abrasive and made for a basecoat/clearcoat paint
finish.
NOTICE:
Machine compounding or aggressive polishing on
a basecoat/clearcoat paint finish may dull the
finish or leave swirl marks.
Foreign materials such as calcium chloride and other
salts, ice melting agents, road oil and tar, tree sap, bird
droppings, chemicals from industrial chimneys, etc. can
damage your vehicle's finish if they remain on painted
6-49