Geo 1995 Prizm Owner's Manual page 115

Recall
RCL: Press this button to see the station being played
for a moment. Or, press it if you want to see the time
when the ignition is off.
To Play
a
Cassette Tape
your tape player is built to work best with tapes that are
30 to 45 minutes long on each side. Tapes longer than
that are so thin they may not work well in this player.
The longer side with the tape visible should face to the
right. If you hear nothing or hear just a garbled sound, it
may not be in squarely. Press to remove the tape and
start over.
Once the tape is playing, use the knobs for
VON
le, fade
and balance, just as you do for the radio. The lignted
arrows show which side of the tape is playing.
MTL: Your bias is set automatically. MTL will appear
on your display when a metal or chrome tape is inserted.
FF: Press this button to advance rapidly to another part
of the tape. Press FF, RCLPROG or to return to
playing speed.
REW Press this button to reverse the tape rapidly. Press
REW or RCLPROG to return to playing speed. If you
press RCLPROG, the tape will also change sides.
NEXT Press this button to go forward to the beginning
of the next selection. Press the button again or press
RCLPROG or
U A
to cancel this function.
For NEXT to work properly, your tape must have at least
three or four seconds of silence between each selection. If
you press RCLPROG, the tape will also change sides.
PREV: Press this button to go back to the beginning
of the last selection. Press PREV again or press
RCLPROG or
H A
to cancel this function.
RCLPROG: Press this button to switch from one side
of the tape to the other. Your cassette tape player can
play continuously because the player has an
auto-reverse feature.
NOISE REDUCTION: Press
OD@
to remove noise
from Dolby@ B NR-encoded tapes.
Dolby@ B Noise Reduction is manufactured under
license from Dolby Laboratories Licensing Corporation.
Dolby@ and the
on@
symbol are trademarks of Dolby
Laboratories Licensing Corporation.
tape and switch to radio.
:
Press the button with this symbol to remove the
3-9