Voice Monitor; Battery Security - Concox GK309 User Manual

8 Voice monitor

When SOS number sends monitor command:
"OK" and call the SOS number. After the call connected, the terminal will enter monitor condition.
The SOS number can hear the sound around the terminal.
9 Geo-fence (Off as default)
Log in the platform to set the geo-fence. When the device is leaving or entering a pre-set area, it
will send alarm to pre-set family number.
10 RFID
RFID is used to record students' attendance by sending messages to the Smart Attendance
System. Then it will convey the messages to the parents via SMS. Once students swipe through
the device of the system, and parents will get the message about student's attendance. If the
school has installed the 2.4G barrier-free attendance system in the front gate, the parents will get
messages whenever students get in or out of the school.
11 Appendix

11.1 Battery security

 Please use the original battery. The warranty will be invalid by using any other
accessory. The manufacturer will not take any responsibility for any damage
caused by not using the original battery.
 The new battery can realize the optimal performance after fully- charging for 2
or 3 times.
 The battery can be used for hundreds of times, yet it will wear out eventually.
When its talking time and standby time shrinks sharply, you need a new one.
 Cut off power supply when not using the charger. Don't charge the battery for
more than one week, since over charging will reduce its using time.
 Do not short-circuit the battery with metal stuff (such as the key in your pocket)
 Do not bend or open the battery.
MONITOR# to the terminal, the terminal will reply