Concox GK309 User Manual

Student card phone

Advertisement

Student Card Phone
User Manual
(Version 1.0)

Advertisement

Table of Contents
loading

Summary of Contents for Concox GK309

  • Page 1 Student Card Phone User Manual (Version 1.0)
  • Page 2: Appearance And Accessories

    1 Appearance and accessories 1.1 Appearance 1.2 Accessories...
  • Page 3: Quick Start

    1.3 Quick start 1.4 LED indicator Statue Green – GSM Blue – GPS Red – Power Purple – Missed SMS/Calls Dark No internet/ No SIM card Flashing GSM is on Searching Low battery Missed SMS/calls (every GPS signal second) Bright GPRS GPS is located Charging...
  • Page 4: Before Use

    in turns for three times until the call is picked up. During phone calls, short press to hang up. During ringtone setting, when the ringtone is playing, short press to stop. Power Off The device can only be turned off when the restricted power off function is off.
  • Page 5: Parameter Setting

    standard charger provided by your supplier. The damage caused by inappropriate charger will be against our warranty. 3.5 SIM card (1) Turn off the device before you insert or take our your SIM card; (2) Open the front cover of the device; (3) Insert the SIM card in the SIM card slot with the metal part facing down.
  • Page 6 4.2.2 Delete SOS Numbers Via SMS command Send SMS command: SOS,D,1,2,3# (D means delete SOS number) e.g. SOS,D,1# means delete the first number SOS,D,3# means delete the third number If you do not know the sequence number, you can also delete the number by SMS command like this: SOS,D,number# e.g.
  • Page 7: White List

    4.4 Call Family Numbers Long press Family Number buttons can call preset numbers. Short press SOS button can hang off the call. NOTE: When the people you call pick up the phone, the terminal will vibrate slightly. 4.5 Answer phone calls When calls come, it will ring or vibrate according to the settings.
  • Page 8: Sos Alarm

    5 SOS alarm Long press SOS button for 3 seconds can activate GPS. The device will vibrate twice and dial pre-set SOS numbers in turns for three times until one of them answers. In the meanwhile, it will send location to SOS numbers. NOTE: SOS number should be set.
  • Page 9: Voice Monitor

    8 Voice monitor When SOS number sends monitor command: MONITOR# to the terminal, the terminal will reply “OK” and call the SOS number. After the call connected, the terminal will enter monitor condition. The SOS number can hear the sound around the terminal. 9 Geo-fence (Off as default) Log in the platform to set the geo-fence.
  • Page 10: Troubleshooting

     Do not put the battery into water or fire.  The battery should never be charged at temperature below 0 degrees or above 45 degrees Celsius. 11.2 Trouble shooting Common Causes Solutions problems Radio waves cannot communicate with device when it is used in a bad Move to a place with good signal.

Table of Contents