Samsung HG32AD690 Instruction Manual page 60

Sound Bar
¦
• Samsung Sound-Bars and Hospitality TV
– Use Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a
compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can
listen to theTV's sound through the Sound-Bar.
– Models supporting the ARC function are listed below:
• Sound-Bars: HW-H450/H550/H570/H600/H7500
• Setting the Sound-Bars to Hotel Mode.
1. Set the following Hotel menu options:
– Hotel option > External Device > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume EN = User Defined.
– Hotel option > Power On > Power On Volume > Set greater than 0.
– Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of Sound-Bar to the HDMI1 port (supporting ARC)
on the hospitality TV.
3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically
detects the TV, and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
• Power On/Off is synchronized with the TV
• HDMI_CEC defaults to On
• Functions through the "HDMI OUT" port only
• Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV's Hotel option menu. The Sound-Bar's
Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in
the TV's Hotel option menu.
Example: If the TV's Power On Volume=20 and Max Volume=90, then the Sound Bar's Power On Volume=10 and
Max Volume=45.
Security mode
¦
Design Specifications
• This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as
a correctional facility.
• The Security menu is password-protected. Access to the Security menu is denied without the password.
• Security Setting
– The Security Setting can be set to ONor OFF.
– The default is OFF.
– Security Setting: If set to On, external source (HDMI, USB) input and the TTX function will be disabled.
• Password Setting
– This allows users to change the password.
– Users must input the current password, a new password, and confirmation of the new password.
• Password Reset
s is to reset the password.
– Thi
– The default password is "00000000".
– Password Reset is visible
It is not visible using the key combination of
• Security Setting: If set to On, the SIRCH function is not available.
• Factory Reset will not reset the Security Setting.
60
English
HW-J450/J470/J550/J6000
only in the Factory menu by using the key combination of Info and Factory.
MUTE + 1 + 1 + 9 + ENTER.
*This function may differ depending on the model.