Operating Sequence - Miele H 4050 BM Operating Instructions Manual

Main menu
The main menu will appear in the display after you have switched the appliance
on with the ON/OFF switch.
QUICK MW
MICROWAVE
FAN PLUS
MICROWAVE+ . . .
The main menu contains 8 sub-menus, which are also further sub-divided. The
various functions can be selected by using just two controls.
The first three functions in the main menu (Quick MW, Microwave, Fan plus) are
suggestions only. You can change the order in which they appear, or replace
them with programmes which you use more frequently.
The remaining five sub-menus cannot be altered.
Quick MW
This programme uses microwave power at 1000 W for one minute. The "settings"
for this programme can be altered if wished via the Settings menu.
Microwave
The parameters for a microwave programme can be pre-set, including the power
level, the duration and also the settings for delaying the start.
Fan plus
As soon as this programme is selected the hot air fan can be heard, and the
appliance starts heating up using the pre-set temperature of 160°C. The
temperature can be changed within a range of 30 to 225°C. The duration and a
delay start time can also be programmed in. If you prefer to start the programme
manually you can set up the appliance so that the hot air fan does not start up im-
mediately.
ALL FUNCTIONS . . .
AUTOMATIC . . .
USER PROGS . . .
SETTINGS F. . .

Operating sequence

25