Stainless Steel Panels; Custom Door Panels; Installation Options - Miele F1411VI Operating And Installation Instructions

Stainless steel panels

Stainless steel door panels and toe-kick
covers are available from Miele.

Custom door panels

This appliance is compatible with all
styles and designs of kitchen cabinetry.
The total weight of the decorative
panel(s) must not exceed the following:
F 1411 Vi . . . . . . . . . . . 123 lbs (56 kg)
Fitting a door panel which is heavier
than the max. permitted could
damage the hinges.

Installation options

There are many different installation
options. You are limited only by the
design of the kitchen.
The door hinge cannot be
exchanged.
Single column
The appliance can be installed at any
preferred location in the kitchen.
However, be sure the door will open
and close properly in the chosen
location.
Side-by-side
This appliance can be installed
"side-by-side" with another
fridge/freezer using a "Merging Kit".
The "Merging Kit" is available from
Miele.
Contact Miele or your dealer for
specific information about which
combinations will work with your
appliance.
For instructions on how to attach the
appliances and install the heating
mat, please refer to the instructions
included with the "Merging Kit",
available from Miele.
Installation without a partition using
the "Merging Kit"
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together
using the "Merging Kit".
Installation
47