Page 1
EVA Royal 8701 Dansk BrugervejleDning english OperatOrs Manual Deutsch BeDienungsanleitung ROYAL CONSUL EUROPE A/S Ringvejen 59 DK-7900 Nykoebing Mors Tlf. +45 96 69 16 00 Fax + 45 96 69 16 01 www.royal-consul.dk e-mail: rce@royal-consul.dk...
Page 15
RE starter gentagelses funktionen: Tryk på “RE” knappen, et lys indikerer at funktionen er klar til brug. Tryk på RE knappen for at få gentaget de indtastede sting, tryk dernæst på start knappen og symaskine syr stingene uafbrudt indtil der trykkes på stop knappen. For at slette RE funktionen trykkes der på...
ZIGZAG STING Deres symaskine kan sy zigzag sting i mange forskellige bredder og længder. For at ændre på sting længde og bredde se side 15 Påsæt alm. trykfod. • Zigzag sting kan med fordel anvendes til kantsyning og sammen syning af 2 stykker stof. For at hæfte strik eller stræk stof, sy så...
Page 27
OBS: Hvis for meget af stingene kan ses på ret siden af stoffet, vælg en smallere sting bredde eller flyt guiden på trykfoden til venstre. Hvis stingene ikke rammer sømmet øges stingbredden, eller flyt guiden på trykfoden til højre.
Page 49
001-200 RE: starts repeat function: Press “RE” button, a light indicates that you can start the repeat function. When using the memory function and you want to repeat sewing the same selection of patterns, press “RE” button, then press start button, sewing machine will continuously repeat patterns selected, until the stop button is pressed.
Page 53
2.Hold the upper thread loosely and press needle up/down button. The handwheel will turn one complete turn.
Your machine can sew zigzag stitches of various widths and lengths by changing the settings of the stitch width and stitch length. See page 15 for changing width and length. Attach all purpose presser foot. • Zigzag stitches are very good for joining two pieces of fabrics or overlocking.
Page 61
Note: If too much of the stitching shows on the right side of the fabric, change to a narrower stitch width or move the guide on the foot to the left. If the zigzag does not meet the fold, widen the stitch width or move the guide on the foot to the right.