Factory Default - Miele LaPerla G 2830 SCi Operating Instructions Manual

Settings J
Dealer
Demo modes are only for
showrooms.
The dishwasher has three demo
programs for showrooms.
The programs "Demo mode" and
"Endless demo mode" show the use
and function range of the dishwasher.
Demo mode
– :
The program is started by touching a
control. It runs once and must be
started again.
Endless demo mode
–
The program starts after it was
activated and runs in a loop until it is
turned off.
Demo wash sound
–
The program activates the pumps to
demonstrate the wash sound.
Turning the demo mode on
^ Select the desired option and confirm
OK
with .
^ Confirm the message
demo mode?
^ Touch any control to start the
selected demo mode.
^ To cancel the demo mode, touch any
control again and confirm with
Turning the demo mode off
^ Select
Off
to deactivate the demo
mode and confirm with
^ Confirm the message
demo mode?
52
:
:
Activate
OK
with .
OK
OK
.
Deactivate
OK
with .

Factory default

All settings can be reset to factory
default.
^ Confirm the message
factory default?
^ Confirm the information
are reset to factory default
OK
.
Leaving the "Settings J menu"
To leave the "Settings J" touch the + C
control. The main menu shows.
.
Reset to
OK
with .
All settings
with