Factory Default - Miele G 5795 Operating Instructions Manual

Showroom program
Demo modes are only for
showrooms.
The dishwasher has various demo
programs for showrooms.
The programs "Demo mode" and
"Endless demo mode" show the use
and function range of the dishwasher.
– Demo mode:
The program is started by pressing
any button. It runs once and must be
started again.
– Endless demo mode:
The program starts as soon as it is
activated and runs in a loop until it is
turned off.
– Demo wash sound:
The program activates the pumps to
demonstrate the wash sound.
– Trade show mode:
Once the machine is used for the
first time this option is disabled in the
display.
– Drying Plus Demo:
The door opens automatically.
Turning the Showroom program on
^ Select the desired option, confirm
with OK.
^ Confirm the following messages with
OK.
^ Press any button to start the selected
demo mode.
^ To cancel the demo mode press any
button again and confirm with OK.
Turning the Showroom program off
^ Select Off to deactivate the
Showroom program and confirm with
OK.
^ Confirm the message Deactivate
demo mode? with OK.

Factory default

All settings can be reset to factory
default.
^ Confirm the message Reset to factory
default? with OK.
^ Confirm the information All settings
are reset to factory default with OK.
Leaving the "Settings J menu"
^ To leave the "Settings J" touch the
"Clear" U control. The main menu
appears.
Settings
!
55