Miele G 5795 Operating Instructions Manual page 14

Before using for the first time
Time of day
Water hardness
14
The display changes automatically to the time of day setting.
} +
} -
^ Set the hours using the +/- controls and confirm with OK.
Set the minutes and press OK.
The display then changes to the water hardness setting.
} 15°d B
} 16°d
To achieve good cleaning results, the dishwasher needs soft
water. Hard water results in calcium deposits on dishware
and in the dishwasher.
If your tap water hardness is above 4 °d (4 gr/gal [US]), the
water should be softened.
– Your local water authority will be able to advise you of the
water hardness level in your area.
– The dishwasher must be programmed to correspond to the
water hardness in your area.
– In areas where the water hardness fluctuates (e. g.
37 - 50 °d [39 -52 gr/gal]) always program the machine to
the higher value (in this example 50 °d [52 gr/gal]).
If there is a fault, it will help the service technician to know the
hardness of your local water supply.
Please note your water hardness below:
12 : 00
Please set the time of day
Water hardness
°d (gr/gal)
OK }
e
OK }