Table of Contents
Advertisement
3.
Select RAID-10 (Fault Tolerance, High Performance) from the Select
RAID Type menu, then press <Enter>.
Refer to the Striping/Mirroring Requirements note at the bottom of the
screen to determine the number of hard disk drives required for the
selected RAID type.
4.
Use the arrow keys to select a RAID set member, then press
<SpaceBar> to mark. An X mark appears after the selected HDD.
5.
Follow the step 4 to select the other members of the RAID set, then
press <Enter> when finished.
ASUS P5MT-S
5-41
Advertisement
Table of Contents
