Asus Motherboard P5MT-S Owner's Manual page 134

2. The utility displays the installed SCSI hard disk drives status and menu
options. When available, the HDD status shows Free. Press <C>.
The utility does not display an installed SCSI HDD(s) with an existing
RAID configuration or is part of an existing RAID set. Use the SCSI Disk
Utilities to reformat the HDD(s), or use the previous RAID card to clear
the RAID configuration on the HDD(s).
3. Select RAID-0 (High Performance, No Fault Tolerance) from the Select
RAID Type menu, then press <Enter>.
Refer to the Striping Requirements note at the bottom of the screen to
determine the number of hard disk drives required for the selected RAID
type.
5-34 Chapter 5: RAID configuration