Table of Contents
Advertisement
8.
If you want to make the array
bootable, select Yes from the
menu, then press <Enter>.
9.
When prompted to create the
RAID 0 set, select <Yes>, then
press <Enter>.
The utility erases all data from the selected hard disk drives. Make sure
to backup all important data before creating a RAID set.
A Build Complete message
appears to indicate that you have
successfully created the RAID 0
set.
10. The screen displays the information on the created RAID set.
Press <Esc> to exit the utility.
5-36
Chapter 5: RAID configuration
Advertisement
Table of Contents
