Running In - BMW 2006 G 650 Xmoto Rider's Manual

Then the instrument cluster
5
assumes normal operation.
If one of the specified warn-
46
ing and indicator lights was
not switched on, or if not all
segments of the multifunction
display are switched on:
If it was not possible to
switch on the warning
lights, possible malfunctions
z
cannot be indicated.
Watch all warning and indica-
tor lights on the display.
Have the malfunction cor-
rected as soon as possible
by a specialized workshop,
preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis
The readiness for operation
of the BMW Motorrad ABS
is checked by the self—diag-
nosis. Self—diagnosis is per-
formed automatically when
you switch on the ignition. To
check the wheel sensors, the
motorcycle must be driven a
few yards.
Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning light flash-
es.
Phase 2
Checking the wheel sensors
while starting off.
ABS warning light flash-
es.
ABS self-
diagnosis completed
The ABS warning light goes
OE
out.
If an ABS fault is indicated
after the ABS self-diagnosis is
completed:
Continued driving is
possible. It must be noted
that the ABS function is not
available.
Have the malfunction cor-
rected as soon as possible
by a specialized workshop,
preferably an authorized
BMW Motorrad retailer.

Running in

The first 600 miles
(1,000 km)
While running in the mo-
torcycle, vary the throttle
opening and engine—speed
range frequently.
Try to do most of your rid-
ing during this initial period
on twisting, fairly hilly roads,
avoiding high—speed main
roads and highways if pos-
sible.
Exceeding the specified
engine speeds while run-
ning in will lead to increased
engine wear.