Trouble Shooting; What To Do, If; Test And Fault Messages - Miele NOVOTRONIC T 7644 C Operating Instructions Manual

What to do, if . . . ?

You can remedy most problems yourself. In many cases you can save time and
expense, since you will not have to call in customer service.
The following tips should help you locate and remedy the cause of a problem.
However, please note the following:
,
Repairs to electrical appliances should only be carried out by qualified
professionals. Work performed by unqualified persons can place the user at
considerable risk.

Test and fault messages.

Problem
Cancelling a program
0 and Finish appear in
the display
The buzzer sounds.
0-§ appears in the
display.
Gentle indicator light
flashes.
Canceling a program
The buzzer sounds.
Flashing display may
show Cold air or Finish.
Cause
This is not a fault.
The electronics
recognizes that there is
no laundry in the drum
and cancels the program.
Drying of single or
already dried laundry
items can also lead to
program cancellation.
The lock function has
been activated.
The cause is not immedi-
ately obvious.

Trouble shooting

Solution
In future, dry individual
laundry items with the
warm air program.
Cancelling test
message:
– Open and close door
If you wish to dry, you
must disable the lock
function (see "Electronic
lock function").
– Switch the dryer off
and then on again.
– Start a program.
If program interruption
and error message occur,
a fault is present. Contact
Miele customer service.
29