AB Quality PanelView Plus Installation Instructions Manual page 11

3. If using keypad legend strips on keypad terminals, we recommend that you
install the strips before installing the terminal. Be careful not to pinch legend
strip during installation.
4. Place the terminal in the panel cutout.
5. Install the mounting clips. The ends of the clips slide into the slots on the
terminal.
Mounting Clip Slot
6. Tighten the mounting clip screws by hand until the gasket seal contacts the
mounting surface uniformly.
PanelView Plus/VersaView CE Terminals and Display Modules
Mounting Clip
Sealing Gasket
Publication 2711P-IN001B-MU-P
11