Battery Installation; Installing The Shoulder Strap - Midland XT511 Owner's Manual

Model XT511 Series

BATTERY INSTALLATION

Your XT511 Series radio operates with either 4 AA alkaline batteries or a NiMH battery
pack. Pls. ensure the rechargeable NiMH battery pack is installed in the radio before
using the AC or DC adapters.
To install the batteries:
1. With the back of the radio facing you, remove the Battery Cover by pressing
down the Battery Cover Lock Tab until it unlocks and lifting it out from the
radio.
2. Insert 4 AA batteries observing the polarity as shown. Installing the batteries
incorrectly will prevent the unit from operating or may damage the unit. Also
install the NiMH battery pack as shown below.
3. Return the Battery Cover by pushing it down into the back of the radio until
the Battery Cover Lock Tab locks into place.
Battery Compartment
Alkaline
Batteries

INSTALLING THE SHOULDER STRAP

To install the SHOULDER STRAP, slide the SHOULDER STRAP CLIP down
into the metal pins on the top of the radio until it locks into place. To remove the
SHOULDER STRAP, press the SHOULDER STRAP CLIP tab down, then
remove it from the radio.
Shoulder Strap Clip
Page 8
NiMH
Battery Pack
Metal Pin
Battery Cover Lock Tab
Battery Cover
Shoulder Strap
Shoulder Strap Clip
Metal Pin
www.midlandradio.com
®