Electronic Oven Control; Display; Clock; Using The Minute Timer - Whirlpool 9782475A Use & Care Manual

Hide thumbs

Advertisement

Table of Contents
ELECTRONIC
OVEN CONTROL
1. Electronic Display

Display

When the range is first plugged in, or after a power interruption,
the display will flash "12:00" until the CLOCK pad (button) is
pressed.
When the oven is in use, the display shows preheat time and the
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
When using the TIMER, for settings of 1 to 59 minutes, the
display will count down in seconds. For settings 1 hour or more,
the display will count down hours and minutes.
When using COOK TIME, the display will show hours and
minutes.

Clock

Setting the Clock
1. Press the CLOCK pad (button).
2. Press the up or down pad (button) until the correct time
shows on the display.
3. Each tap of the up or down pad(s) or button(s) will change the
displayed time by 1 minute. If a button is held, the displayed
time will change in 10-minute increments. The Set Clock
mode automatically exits to the clock display mode
60 seconds after the last data change.
NOTE: When the range is first plugged in, or after a power
interruption, the display will flash "12:00" until the CLOCK
pad (button) is pressed.
8
1

Using the Minute Timer

The minute timer does not start or stop the oven. It works like a
regular minute timer independent of the oven to time anything
you like. The minute timer can be set in 1-minute increments up
to 12 hours.
To use the Minute Timer:
1. Press the TIMER pad (button).
2. Press the up or down pad (button) to set the TIMER. The
timer will automatically start 5 seconds after the time is
entered. The "TIMER Indicator" will be lit to indicate that the
minute timer is being displayed. When time remaining is less
than one minute, 1 beep will sound and the display will count
down the seconds remaining.
To return to time of day:
1. Press the CLOCK pad (button) to return to the time of day.
The time will be displayed for 5 seconds and then return to
the timer display.
2. At the end of the timer cycle, 4 beeps will sound and "End"
will be displayed until a pad (button) is pressed.
To cancel Minute Timer:
Press TIMER twice or press and hold the down pad (button) until
0:00 is reached. The time of day display will return in 5 seconds.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door and element or
burner cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. No sign means the oven will be warmer by the displayed
amount. Use the following chart as a guide.
ADJUSTMENT °F
(ADJUSTMENT °C)
5° to 10°F (3° to 6°C)
15° to 20°F (9° to 12°C)
25° to 35°F (15° to 21°C)
-5° to -10°F (-3° to -6°C)
-15° to -20°F (-9° to -12°C)
-25° to -35°F (-15° to -21°C)
COOKS FOOD
...a little more
...moderately more
...much more
...a little less
...moderately less
...much less

Advertisement

Table of Contents
loading

  Related Manuals for Whirlpool 9782475A

  Related Content for Whirlpool 9782475A

Table of Contents