How To Use The Fuga M; The Power Of Fire; A Few Tips - Harrie Leenders FUGA M Instructions For Installation, Use And Maintenance Manual

Harrie Leenders Fuga M - Instructions for Installation, Use and Maintenance

How to use the Fuga M

1. Fully open the air-control slide by moving it towards the front of the
stove. This is the kindling position.
2. Place 3 fairly thick logs on the bottom of the stove. Stack some kin-
dling wood on top of them. Stack lightly.
Light the kindling wood up in the stove with a firelighter or some paper.
Allow some time for the stove to heat up in order to ensure a proper
draught and a good fire under the more solid logs to be added.
3. When the stove has been burning properly for a while, add a few
more solid logs. (First open the aeration slide.)
Stack lightly. The amount (not more than 3 logs) depends on the heat
required.
4. A quietly burning fire is obtained by closing the air slide even more
by pushing it inwards. This will reduce the draught in the Fuga M. For a
glowing mass of charcoal, you may close the air slide even further. The
heat will then last longer. When you want to let the fire die down, you
must open the air slide more.
14