Brightness/Contrast Control; Color Control - NEC MultiSync P750 User Manual

OSM Menus
The icons control the following:

Brightness/Contrast Control

BRIGHTNESS: Adjusts the overall image and background screen
brightness.
CONTRAST: Adjusts the image brightness in relation to the
background.
DEGAUSS: Eliminates the build-up of stray magnetic fields which alter
the correct scan of the electron beams and affect the purity of the screen
colours, focus, and convergence. When activated, your screen image
will jump and waver a bit as the screen is demagnetised.
Caution: Please allow a minimum of 20 minutes to elapse between uses
of the Degauss function.
Size and Position
LEFT/RIGHT: Moves the image horizontally (left or right).
DOWN/UP: Moves the image vertically (up or down).
NARROW/WIDE: Increases or decreases the horizontal size of the
image.
SHORT/TALL: Increases or decreases the vertical size of the image.

Color Control

Color Presets 1 through 5, selects the desired color setting. The bar is
replaced by the color setting choice from 1 to 5. Each color setting is
adjusted at the factory to the stated degree Kelvin. If a setting is adjusted,
the name of the setting will change from degree Kelvin to Custom.
RED, GREEN, BLUE: Increases or decreases red, green, or blue
depending upon which is selected. The change in color will appear on
screen and the direction (increase or decrease) will be shown by the bars.
Note on Controls in Color Control Menu:
EXIT: Exits to the main menu.
Cursor / :Moves the highlighted area up/down to select one of the
choices.
E - 15