Advertisement
Quick Links
H301F-15
H102F-04
H102F-05
SD Card
Protection Ring
Bracket Module
H101-21
H101-20
H102-D16
Battery Box
Lipo battery for Transmitter
H102F-02
H101-D24
Camera set Module
Camera PCB Module
H102-D17
charger
upgrade metal rotor head
FPV HELICOPTER
INSTRUCTION MANUAL
CONTENTS
>INTRODUCTION
>SAFETY NOTES
>SAFETY CHECK BEFORE FLYING
>TRANSMITTER SETUP
>INSTRUCTION FOR BATTERY RECHARGING
>FLYING TRAINING
™
No.H101D
Advertisement
Related Manuals for Hubsan H101D
Summary of Contents for Hubsan H101D
-
Page 1: Instruction Manual
Camera set Module Camera PCB Module FPV HELICOPTER INSTRUCTION MANUAL H101-21 H101-20 H102-D16 H102-D17 Battery Box Lipo battery for Transmitter charger upgrade metal rotor head No.H101D CONTENTS >INTRODUCTION >SAFETY NOTES >SAFETY CHECK BEFORE FLYING >TRANSMITTER SETUP >INSTRUCTION FOR BATTERY RECHARGING >FLYING TRAINING... - Page 2 H101D Spare Part Chart H201-01 H101-A01 H201-05 H201-11 H102-D03 Body Shell Battery cover Driving Gear Undercarriage Set Rotor Grip Set H102-D04 H201-10 H201-21 H201-27 H102F-01 Bearing set Receiver Mount Servo Set Indicator light H101-02 H102-D07 H101-01 H101-03 H102-D06 Main Frame Set...
- Page 3 1 INTRODUCTION Thank you for buying HUBSAN products. The helicopter is designed as an easy to use, full featured RC helicopter model capable of all forms of rotary flight. Please read the manual carefully before assembling the model, and follow all precautions and recommendations within the manual.
- Page 4 Starting recording by either pressing the The video recording time will start to count button next to SD card slot on the when recording starts (see the methods helicopter or using the remote below) LiPo batteries differ from conventional batteries in that their chemical contents are encased in a relatively insubstantial foil packaging.
- Page 5 2.4 PROPER OPERATION proficiency in the Advanced Maneuvers. For the safety purpose, please only use hubsan’s spare parts for replacement. Make sure it really is a flat calm day outside. And remember that outdoor flight is a 2.5 ALWAYS BE AWARE OF THE ROTATING BLADES whole new learning experience.
- Page 6 4.1 Identification and functional keys maintaining the Rudder input Exiting the Turn maneuver Main Menu 6. At the end of the turn, begin to SUMULTANEOUSLY ease off the cyclic Roll, Display Display 5805 HUBSAN 7.7V RC capacity 5805 HUBSAN 7.7V RC capacity collective Rudder and the additional Throttle inputs.
- Page 7 Input Key Function 4. Notice that the cyclic joystick is spring-loaded, you must maintain a forwards pressure on the cyclic joystick otherwise it will return to its neutral position and your Identification Function helicopter will stop moving. Forward and backward movement of the stick makes the helicopter ascend and descend respectively.
- Page 8 1.Keeping a safe 1 to 2 meters from your model, S-M-O-O-T-H-L-Y advance the seconds to confirm and exit. collective Throttle joystick until your helicopter reaches approximately shoulder height. 5805 HUBSAN 7.7V Set reverse 2.S-L-O-W-L-Y apply collective Rudder control to point the nose of your helicopter in Elevator Normal the direction you wish to fly.
- Page 9 (height) is more difficult than hovering a little higher. This difficulty is because the downdraft from your rotors is bounced back off 5805 HUBSAN 7.7V the ground, resulting in turbulent air around the Set reverse helicopter-this is referred to as ‘Ground Effect’.
- Page 10 2. After completing the ‘Power-On (Failsafe) Procedure’, place your model on a 5805 HUBSAN 7.7V smooth, flat surface which will allow it to slide and turn (a landing board is idea). Set reverse...
- Page 11 4.4 FPV MODULE 6.2 Effect of Control 4.4.1. Your FPV helicopter equipped with a video camera, mounted under the CAUTION: To avoid loss of control: ALWAYS move the controls S-L-O-W-L-Y! Be bottom of helicopter, you can push the camera upward or downward to adjust the aware that control inputs will reduce available lift (see ‘Helicopter Principles of Flight’).Be ready to use a little extra Throttle to maintain height during maneuvers.
- Page 12 5.4 Fitting the LiPo battery The supplied LiPo battery is mounted inside a cradle on the underside of your helicopter’s fuselage. Insert the plug into Return the holder Fasten the screw The LiPo battery should be mounted the power jack back to the compartment with its connecting cables facing towards the rear or the helicopter...