Isolate A Section From Being Armed; System Off - Disarming The System - Hypertech ICON 8 User Manual

Isola te te te te te a Section from being Armed Isola Isola
Isola Isola
Notes:
1. When entering section numbers a two digit number eg 01 or a single 1
may be used. Single digit entry. i.e. the leading zero is ignored)
2. Only valid section numbers may be entered.
3. Sections are automatically de-isolated when the system is changed to
OFF mode.
4. Depending on technician setup, isolations may be reported to the
Central station.
Key Sequence
1 2 3
0 4
0 7
ON or part
Disarming the System - OFF Mode
Notes:
1. Only a valid User Code can change the system between OFF, ON and
Partial modes.
2. Fire, Panic and Tamper inputs, if fitted, are always armed.
3. This key sequence also acknowledges or silences the siren / strobe if a
Fire, Panic or tamper alarm is actuated.
Key Sequence
1 2 3
4 isolate
- OFF Mode - OFF Mode - OFF Mode
- OFF Mode
4 Off
page 7
Operation
Example shows a User Code 1 2 3 4
being used to enter Isolation mode.
Sections 4 and 7 are being Isolated.
When desired sections are isolated
Operation
Example shows a User Code 1 2 3 4
being used to change the system to
OFF mode