User Code - Programming - Hypertech ICON 8 User Manual

User Codes User Codes
Changing User Codes User Codes User Codes
Notes:
1. User 01 default is 1111.
2. User codes are 4 digits long.
3. User codes are used to change the status of the panel, isolate sections or
acknowledge alarms.
4. User codes cannot be the same or within one count of another User code
including the first 4 digits of the Master Code.
5. To change User codes the system must be in the OFF mode.
Key Sequence
2 1
0 1
1 2
0 7
8 7
Off
8 5 7
3 4 On
6 5 On
page 8
Operation
Example shows a Master
code eg 218572 used to
2 On enter program mode.
(Enter your own
Select User code 01
Enter new code 1 2 3 4
Select User code 07
Enter new code 8 7 6 5
Exit program mode
with the OFF key.