Sony LMD-1950MD Instructions For Use Manual page 19

1
Press the POWER switch to turn on the unit.
The power is turned on and the SELECT SETTING
screen appears.
S E L E C T S E T T I N G
x N O R T H A M E R I C A
• L A T I N A M E R I C A
• A F R I C A A U S T R A L A S I A
E U R O P E M I D D L E - E A S T
• A S I A E X C E P T J A P A N
• J A P A N
2
Press the M or m key to select the area where you
intend to use the unit and press the ENTER key.
If you select either 1, 3 or 5
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
MENU key to return to the previous screen.
S E L E C T T H I S A R E A ?
N O R T H A M E R I C A
[ E N T E R ] Y E S
[ M E N U ] N O
If you select either 2 or 4
One of the following screens appears. Press the M
or m key to narrow the area further and then press
the ENTER key.
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
MENU key to return to the previous screen.
2 If LATIN AMERICA is selected:
L A T I N A M E R I C A
x P A L & P A L - N
A R E A
A R G E N T I N A
P A R A G U A Y
U R U G U A Y
• N T S C & P A L - M A R E A
O T H E R A R E A
1 North America
2 Latin America
3 Africa Australia/New
Zealand, Europe, Middle
East, Russia
Asia Except Japan
4
5 Japan
PAL&PAL-N area
Argentina
Paraguay
Uruguay
NTSC&PAL-M area
Other area
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded
areas shown in the map below should select NTSC
AREA.
Other customers should select PAL AREA.
A S I A E X C E P T J A P A N
x N T S C
A R E A
• P A L A R E A
3
Press the ENTER key.
The area setting is executed and the COMPLETED
screen is displayed.
C O M P L E T E D
N O R T H A M E R I C A
[ E N T E R ] E X I T M E N U
[ M E N U ] U N D O S E T TI N G S
Press the MENU key to return to previous screen
and undo settings.
4
Press the ENTER key.
The COMPLETED screen is disappeared and the
default setting is completed.
Note
When you have selected the wrong area, set the
following items using the menu.
• COLOR TEMP (on page 24)
• COMP LEVEL (on page 29)
• NTSC SETUP (on page 29)
See "The default setting values for each area" (on
page 18)
NTSC area
PAL area
Selecting the Default Settings
19