1-2. PRECAUTIONS UPON INSTALLATION
1-2-1. Instruction for Installation Environment
1. Install the washing machine on a solid and level floor.
2. Place the machine at least 10cm away from the wall.
3. Placement on an inclined, weak or rough floor may cause abnormal trembling.
1-2-2. Balance
See if machine is placed level by checking the position of the washing tub.
* Open the lid of the machine, pour water into the tub up to the level just below the
pulsator, and adjust the legs so that the pulsator is positioned at the center of the
water as shown in the figure.
* To control the machine level, turn 10cm away the wall.
WATER
WATER
1-2-3. Controlling the Front Adjustable Leg
To control the height, turn the adjustable leg.
(a)
(b)
1-2
(a)
(a)
(b)
(b)
Need help?
Do you have a question about the SW85ASP and is the answer not in the manual?
Questions and answers