Security Tronix ST-DVR4CH User Manual page 46

Picture 4.18 Net-Service
【PPPOE setup】
Picture4.19 PPPOE
Input the user name and password that ISP<Internet service
provider>provides. After saving it reboot up your system. Then the DVR will
build a network connection based on PPPOE. The IP address will change
into dynamic IP address after above operation is well done.
Operation：After PPPOE dialing successfully look up the IP address in
the [IP address] and obtain the current IP address. Then use this IP address
to visit the DVR through user port.
【NTP setup】
Page 44