Network Setup; Net Service - Security Tronix ST-DVR4CH User Manual

4.4.3 Network setup

【Net Card】You can choose cable network card or wireless network
【DHCP Enable】Obtain IP address automatically(not
suggested) Note：DHCP server is preinstalled.
【IP address】Set the IP address. Default: 192.168.1.10.
【Subnet mask】Set the subnet mask code. Default: 255.255.255.0. 【
Gateway】Set the default gateway. Default: 192.168.1.1.
【DNS setup】Domain Name Server. It translates the domain name into
IP address. The IP address is offered by network provider. The address
must be set and reboot then it works.
【TCP port】Default: 34567.
【HTTP port】Default: 80. 【
HS Download】
【 Transfer Policy 】 There are three strategies: self-adaption, image
quality precedence and fluency precedence. The code stream will adjust
according to the setup. Self-adaption is the tradeoff between the image
quality precedence and fluency precedence. Fluency precedence and self-
adaption are valid only when the assistant code stream is turned on.
Otherwise image quality precedence is valid.

4.4.4 Net Service

Choose the network service option and click the set button to configure
the advanced network functions or double click the service button to
configure the parameters.
Picture4.17 Network
card.
Page 43