Tool Shop 240-2081 Operator's Manual page 3

SAFETY PRECAUTIONS FOR COMPOUND MITER SAW
IMPORTANT SAFETY INSTRUCTIONS
14. USE EYE PROTECTION.
or coarse dust.
15. SECURE WORK.
16. DON'T OVERREACH.
17. MAINTAIN TOOLS.
18. AVOID UNINTENTIONAL STARTING. Be sure the switch is in the OFF posi
19. ALWAYS CHECK AND MAKE SURE TO REMOVE ANY ADJUSTING KEYS
OR WRENCHES
20. DO NOT USE THE TOOL IF IT CANNOT BE SWITCHED ON OR OFF.
21. DISCONNECT THE PLUG FROM THE POWER SOURCE BEFORE MAKING
ANY ADJUSTMENTS.
if the tool accidentally starts.
22. STAY ALERT.
are doing and use common sense. Do not operate any tool when you are tired,
or using medication which can make you drowsy.
23. CHECK FOR DAMAGED PARTS.
;any
that may affect safe
center. Don't use the tool if switch does not turn it on and off properly.
24. REPLACEMENT PARTS.
parts.
25. SERVICE AND REPAIRS
shock or injury.
1. WOOD ONLY.
2. DAMAGED OR WARPED SAW BLADES
injury.
3. USE ONLY WITH GUARD IN PLACE.
in use.
4. REPLACE THE TABLE INSERT WHEN WORN.
part of your saw.
5. ALWAYS USE THE BLADE WRENCH
6. CONNECT YOUR MITER SAW TO A DUST COLLECTING DEVICE if pos-
7. USE A SAWBLADE SUITED TO THE CUTTING JOB AND MATERIAL TO BE
CUT.
, k
or mountings, or other conditions
,
will free both
Watch what you
or binding of
3