Advertisement
Quick Links
Advertisement
Related Manuals for Xomax XM-2DTSBN706
Summary of Contents for Xomax XM-2DTSBN706
- Page 1 XM-2DTSBN706 INSTRUCTION MANUAL...
-
Page 3: Table Of Contents
Product specification CONTENTS ....02 Description of the functional buttons ...04 Instruction for the operation of main menu ℃ ---+60 ℃ ....04 Instruction for the operation of radio ℃... -
Page 4: Description Of The Functional Buttons
Instruction for wiring and accessories Instruction for the operation of front control panel 1. Description of the functional buttons GPS ANTENNA XM-2DTSBN706 BRAKE ORANGE BLUE/WHITE MUTE BROWN STEERING WHEEL CONTROL1 BROWN/BLACK STEERING WHEEL CONTROL2 BLUE/BLACK AMP CONTROL BLACK STEERING WHEEL CONTROL(-) - Page 5 Instruction for the operation of front control panel Unit Installation 2. Schematic diagram of the left SD card slot (for multimedia) and the right SD card slot (for GPS). When the SD card is inserted, the front panel must be decline. There are two SD card slots on the base, When this system is deigned with the GPS function, the right SD card slot is for the insertion of GPS map card.
-
Page 6: Instruction For The Operation Of Main Menu
Instruction for the operation of touch screen Introduction for the function of controller 1. Instruction for the operation of main menu (Slow playback): under the sound play state, press this button to conduct slow playback. (Volume increasing/decreasing) button: press this button to adjust the volume. (Zoom in) button: under the disc reading state of VCD/DVD, press this button to zoom in/out the image. -
Page 7: Instruction For The Operation Of Quick Browse Setting
Introduction for function of controller Instruction for the operation of touch screen 1. Search and select the needed radio channel 2. Select one unit (pre-set number) from N0.1 to No. 6 unit (pre-set number) and press (long press) this unit (pre-set) number for 2 seconds. The radio frequency will be stored in this unit (pre-set number) and will be displayed. -
Page 8: Instruction For The Setting Operation
Instruction for the operation of touch screen Instruction for operation of touch screen 4. Instruction for the setting Operation 9. Instruction for the GPS operation Insert the GPS navigation card into the GPS card slot and press the 【GPS】icon on 4.1 General setting the main menuto enter GPS main interface. - Page 9 Instruction for operation of touch screen Instruction for the operation of touch screen 4.4 Audio setting 9.2. 2 Or start the simulation: In step 1 from the end of the path planned basis points Audio setting mainly includes setting for: [SUB] for control Sub woofer ON/OFF, into the lower right corner of map "Menu"...
- Page 10 Instruction for the operation of touch screen Instruction for the operation of touch screen 8. Instruction for the operation of Bluetooth 4.7 Setting for steering wheel On the main menu， touch the [BT] icon to enter the bluetooth menu. The mobile 4.7.1 The steering wheel controller's KEY1 (brown), KEY2 (brown-black), KEY GND (black) and the unit cable's KEY1 (brown), KEY2 (brown-black), KEY GND (black) phone matches with the system .The initial password for matching is 0000.
-
Page 11: Aux
Instruction for the operation of touch screen Instruction for the operation of touch screen 6. Instruction for the operation of SD/USB 4.7.4In the event of the interface, you can set the function value of the button, touch the N / A area will pop-up the value, touch the button up or down to search the function value. Operation for SD card is the same as that of U disk. - Page 12 Instruction for the operation of touch screen Instruction for operation of touch screen 5. Operation for the DVD/ VCD/CD Put the disc in to the system and enter the main menu. Click the [DVD] button to enter DVD playing interface for playing. If the playing ends or the disc needs to be taken out, please press the slot out button to take out the disc.
Need help?
Do you have a question about the XM-2DTSBN706 and is the answer not in the manual?
Questions and answers