1. Manuals
  2. Brands
  3. MicroNet Manuals
  4. IP Phone
  5. SP5101
  6. User manual

MicroNet SP5101 User Manual

Micronet technology ip phone user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

User Guide

VoIP Telephone
Model No.: SP5101
Website:
http://www.micronet.info
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP5101 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MicroNet SP5101

Summary of Contents for MicroNet SP5101

  • Page 1: User Guide

    User Guide VoIP Telephone Model No.: SP5101 Website: http://www.micronet.info...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ... 5 Packet Content... 5 Key Features ... 5 GENERAL DEFINITIONS ... 6 Telephone appearance ... 6 Key Definition... 8 Keys with “123” number mode ... 9 Keys with “ABC” character mode ... 11 Keys with “abc” character mode... 12 Menu keys...
  • Page 3 3.1.2 Dialed Calls ...22 3.1.3 Missed ...22 3.1.4 Delete All ...23 Phone Book ... 23 3.2.1 New Entry ...23 3.2.2 View Entry ...24 3.2.3 Search Entry...25 3.2.4 Memory Check ...25 Networking Setting ... 26 3.3.1 IP Mode ...26 3.3.2 IP Address ...26 3.3.3 Net Mask ...27 3.3.4...
  • Page 4 Making Calls ... 36 4.2.1 OFF-HOOK Dialing...36 4.2.2 Redial (OFF-HOOK Dialing) ...36 4.2.3 Pre-Dial ...36 4.2.4 Redial (ON-HOOK Dialing) ...37 4.2.5 Dial during connected ...37 4.2.6 Memory Dial ...37 Answer Calls ... 37 4.3.1 Answer the call in the ringing state ...37 4.3.2 Answer the call in the connect state...37 Hold and Retrieve Calls ...
  • Page 5 [debug] command ... 71 [reboot] command ... 71 [pbook] command ... 71 [commit] command ... 72 [ping] command ... 72 [time] command ... 72 [ifaddr] command... 73 6.10 [pppoe] command ... 74 6.11 [flash] command ... 75 6.12 [sysconf] command ... 76 6.13 [sip] command ...

  • Page 6: Introduction

    1. INTRODUCTION The Micronet SP5101 VoIP desktop telephone highly integrates DSP/codec system-on-chip solutions to provide the industry’s highest voice quality. For ease-of-use functionality, SP5101 provides well compatibility with many well-known IP-PBX, and many user-friendly feature buttons of conference, call pick up, transfer, Redial, Hold …etc. The simple operation and configuration are most suitable for residential, SOHO, and enterprise applications.

  • Page 7: General Definitions

    2. General Definitions 2.1 Telephone appearance Front View Bottom shell...

  • Page 9: Key Definition

    2.2 Key Definition KEYPAD Line1 Line2 Forward FUNCTION 1. Press this key to confirm a menu selection, a setting, or a phone entry. 2. When in menu mode, pressing this key will select the menu selection highlighted. 3. When entering phone setting or menu selection entry, pressing this key will confirm the entry.

  • Page 10: Keys With "123" Number Mode

    KEYPAD Missed Blind Tran Mute Headset Conf Pick Trans Redial Hold This phone could support three methods for the text input, such like this: “123”, “ABC”, “abc”. “123” is for the number inputs, “ABC” is for the uppercase character inputs; “abc” is for the lowercase character inputs. User could press the 2.3 Keys with “123”...
  • Page 11 Input method switch key...

  • Page 12: Keys With "Abc" Character Mode

    2.4 Keys with “ABC” character mode Users could enter the characters with the uppercase in this mode. The key could only input the special symbols and press more times to pick up the symbols you want. If users press two times on the key character will be E.

  • Page 13: Keys With "Abc" Character Mode

    2.5 Keys with “abc” character mode Users could enter the characters with the uppercase in this mode. The key could only input the special symbols and press more times to pick up the symbols you want. If users press two times on the key character will be e.

  • Page 14: Menu Keys

    2.7.2 LCD Display in IDLE state Displaying in the IDLE mode while the network and 2006/05/10 10:10 registration were ok. (User can change display name SipPhone SP5101 from SIP configuration) 2006/05/10 10:10 Registrations fail during the IDLE mode Register Fail...

  • Page 15: Lcd Display In Off-Hook State

    2.7.4 LCD Display in DISCONNECTED state 2006/05/10 10:10 After the remote side sends the BYE message, SipPhone SP5101 LPSP5101 will automatically return IDLE state. 2.7.5 LCD Display for RINGING state Incoming call… Incoming call with the calling name or number 2.7.6...

  • Page 16: Lcd Display For Incoming Call State

    2.7.7 LCD Display for Incoming Call state Jaosn When it received incoming call, it will show incoming 65605 call display name and Line number 2.7.8 LCD Display in CONNECTED state Line 1 Talking… During the talking state and running the timer 00:00:10 Line 2 Talking…...

  • Page 17: Lcd Display For Firmware Upgrading Mod

    presses C button to reject call waiting. 2.7.10 LCD Display for firmware upgrading mode Download… Firmware file downloading mode Download… Writing the firmware after the firmware downloading Writing… Completed… Request for the rebooting after the firmware Please reboot upgrading 2.7.11 LCD Display for saving and rebooting mode Saving…...

  • Page 18: Editing Display

    cursor will be blinking every 500ms just like the example as above: → John → If the users enter the incorrect info, the LCD will show as following: Invalid Input… 2.8 Editing Display a Cursor Under the characters or digits, the cursor will be displayed and the characters or digits will be blinking.

  • Page 19: Led Display

    2.9 LED Display While users power on this phone set, all the LED will be lighted up before the system initializing procedure finished. The function LED will be light while users press the function keys; and will be blink while users press the function keys for twice.
  • Page 20 hook/speaker button. When having incoming call, press HEADSET button can pick up call and press again can hang up call. 3. When in communication, press HEADSET button can switch voice path to headset.

  • Page 21: Lcd Menu Operation

    3. LCD Menu Operation During the menu operation, there is no cursor for the configuration tables selecting. The LCD will show just like this: Users could press the up or down arrow keys to move on different item. This sign will guide you to choose the configuration tables. In the main menu, it will exit the menu and back to the IDLE mode if there is no action for 30 seconds.

  • Page 22: Received

    3.1.1 Received Showing the received calls; pressing the out the other received calls. >Received Calls → >Dialed Calls The LCD will show as following while there is no any record for the received calls: No Records!! ● Dial out >John →...

  • Page 23: Dialed Calls

    entry added, show all the entries in the phone book to verify by users. If users press the button, the flow will be just like the actions in the phone book >John → >12345678 >Dial Out → >Detail Entry name ●...

  • Page 24: Delete All

    3.1.4 Delete All This will delete all the records of the received, dialed and missed calls. Delete it? → 3.2 Phone Book This phone set could support 90 entries of the phone book. Users could add, modify, delete, and dial out all the entries in the phone book. If the name and number had been added in the phone book, the LCD has to show the name if it is the incoming call.

  • Page 25: View Entry

    This is allowed the same number with the different name. For the name of the incoming call displaying, the phone set will show up the latest record configured by users. This isn’t permitted for the empty info about the name in this mode. If users press the button without any info for the name, the LCD will show as following and return to the New Entry table after a few seconds:...

  • Page 26: Search Entry

    Users could press the If there is no any entry for the phone book, LCD will show the massage as following: No Records!! Dial Out Press on specific phone book entry, phone will be off-hook and dial out automatically. Modify Entry Here user can modify name and number of existed phone book data.

  • Page 27: Networking Setting

    2 Used 88 Free 3.3 Networking Setting IP Mode Fixed DHCP PPPoE IP Address Net Mask Default GW DNS Setting Primary DNS Second DNS PPPoE Password Reconnect SNTP SNTP Server IP Time Zone Mode 3.3.1 IP Mode Press the 3.3.2 IP Address Enter IP address for Fixed IP mode.

  • Page 28: Net Mask

    3.3.3 Net Mask All the operation is just like the IP Address configuring. It will be shown as following from the LCD: IP Mask: 255.0.0.0 3.3.4 Default GW All the operation is just like the IP Address configuring. It will be shown as following from the LCD: Default GW: 10.1.1.254...

  • Page 29: Pppoe

    3.3.6 PPPoE It could support the number or character typing in this mode User Name: pppoe Password For the protecting policy, LCD will use the asterisk to replace the info showing. Password: ***** For the password modify displaying, the LCD will clean all the asterisks and showing the cursor as following: Password: →...

  • Page 30: Sip Setting

    Server IP To enter SNTP server IP address. It supports the number typing and Domain typing. Server IP: 168.95.195.12 Time Zone Pressing the for decreasing and button will save the changed. Zone: +8:00 3.4 SIP setting All the menu operations are as same as the Networking setting. Proxy Setting Proxy IP Proxy Port...

  • Page 31: Proxy Port

    Proxy IP: 10.1.1.2 3.4.1.2. Proxy Port Configuring the Proxy port in this table; it could only support the number typing. The max value is 65535. Proxy Port: 5060 3.4.1.3. OutPx IP This is the setting for the Outbound Proxy. It could support the number and character typing for the IP or domain.

  • Page 32: Local Port

    the cursor as following: Password: → Password: → 3.4.2.3. Phone Num It could support the number typing only. PhoneNum: 3.4.2.4. Local Port It could support the number typing only and the max value is 65535. Local Port: 5060 3.5 Phone Setting Alarm Setting View All Del All...

  • Page 33: Alarm Setting

    3.5.1 Alarm Setting There are some definitions for the Alarm clock, please check out the detail as following: If the alarm clock had been set and the time is up: The phone will be ring in the IDLE and MENU state only. If the phone isn’t in the IDLE or MENU state, the phone will ring while the state back to the IDLE or MENU.

  • Page 34: View All

    >01 06/01/01 10:20 >02 EveryDay 10:11 3.5.1.2. View All >01 06/01/01 10:20 → >02 EveryDay 10:11 >Delete Entry → Deleting… → 3.5.1.3. Del All Delete All? → >View All >Delete All 3.5.2 Ring Setting 3.5.2.1. Ringer Volume There are four levels for the volume adjustment and the default is level 2. The symbol “>”...

  • Page 35: Mail Box

    the ring volume. 3.5.2.2. Ringer Melody This phone set could support four types of ring melody. >Melody 1 → >Melody 2 Saving … → 3.6 Mail Box Information MailBox No. MailBox Key Voice Mail Dial 3.6.1 Information If VNS LED lights up, you can view voice mail information from this item. Below: Information: 2 new, 1 old...

  • Page 36: New Entry

    Input Number Press the key… From PhoneBook Phone Book List Press the key… View Entry Function Key list Users could configure the Function Keys for the speed dial or special IP-PBX function. For the function keys configuration, users could input the new number or select the entries from the Phone Book.

  • Page 37: Basic Function

    4. Basic Function 4.1 Power on and initialization During the initialization procedure: All the LED will light on till the initialization procedure was finished. All the LED will light on if there is error during the procedure. On LCD will show “Initializing”. 4.2 Making Calls There are some ways to make outgoing calls: OFF HOOK Dialing...

  • Page 38: Redial (On-Hook Dialing)

    During the Pre-dial function: This is permitted to enter and dial out the digits “*” and “#”. If the dialed number could be matched with the list in the phone book, LCD will display the name of this record. 4.2.4 Redial (ON-HOOK Dialing) This will show all the records of the dialed list.

  • Page 39: Hold And Retrieve Calls

    During the hold status, the LED of Line will flash. 4.5 Transfer SP5101 could support the call transfer with two types, one is the Consultant, and another is the Blind transfer. The transfer could be initialized only for the state as above.

  • Page 40: Conference

    4.6 Conference User needs to specify conference function to be local conference or server-based conference. Conference Scenario: A. Local Conference: (1) A communicate with B→Conf or Line hear dial tone+ C’s number→C pick up → press Conf again to build conference (2) A communicate with B→Conf or Line hear dial tone+ C’s number→C refuse to join conference →...

  • Page 41: Web Administration

    5. Web Administration 5.1 Factory Default DESCRIPTION Net Mask: Default Gateway: SIP Proxy: SIP account SIP Port: Proxy Port: RTP Port: Digit Timeout: Call waiting: Call transfer 5.2 Configuring the SIP Phone through Web Pages The HTTPD web management interface provides user an easier way to configure rather than command line method through TELNET.

  • Page 42: Step 1. Browse The Ip Address Predefined Via Keypad

    Step 1. Browse the IP Address predefined via Keypad Please enter IP address (user have to set via LCD menu first) of SIP Phone in web browser . If user failed to set IP address via LCD menu, the default IP 10.1.1.3, user can try to connect to SIP Phone via address of SIP Phone is this default IP via web interface.

  • Page 43: Step 2. Input The Login Name And Password

    Step 2. Input the login name and password Login name: root / user Note: Login with “user” only has authority as below: 1. Modify network configuration 2. Modify Phone Book 3. Change login password of “user” 4. Reboot Password (The same with TELNET): Null (just press confirm, no need to key in password in default value) Note: User can set password later via web interface.

  • Page 44: Step 3. Enter The Web Interface Main Screen

    Step 3. Enter the web interface main screen After enter login name and password, user can see web interface main screen as below. Step 4. Start to configure After enter web management interface, user can see four main items. 1. Installation Wizard: User can follow steps in wizard to make first-time initial configuration.

  • Page 45: Installation Wizard

    5.3 Installation Wizard Installation Wizard includes three steps: (A) Network Connection Mode: User has to select SIP Phone network mode as Static IP, DHCP or PPPoE.
  • Page 46 (B) Network Configuration: After selecting network connection mode, user has to input related network parameters. (1) Static IP: User has to input IP, subnet mask, default gateway, and DNS server address. (2) PPPoE: User has to input PPPoE connection user name and password.
  • Page 47 (C) Protocol Configuration: After setting network, user has to set SIP related parameters. Primary Proxy Address and item A, please input Primary Proxy address and signaling port of Proxy. Secondary Proxy Address and port: secondary Proxy server and port for backup. Outbound Proxy Address and port: Proxy and port if necessary.

  • Page 48: Advanced Configuration

    5.4 Advanced Configuration 5.4.1 Network Configuration (1) Network Configuration Network Connection Mode: User has select network configuration mode first, then configuration page will display related items. (a) Static IP: If user selects Static IP mode, following items will be displayed. IP Address: Subnet Mask: Default Gateway:...
  • Page 49 address here. HTTP Port for WEB Management: Set port number for user to configure SIP Phone via WEB management. Default value is 80.
  • Page 50 (c) PPPoE: If user selects PPPoE mode, following items will be displayed. DNS Server Obtained Mode: PPPoE mode, user can determine DNS address is obtained from server or set manually. Primary DNS Server: manually, please set Primary Domain Name Server IP address here.
  • Page 51 (2) Behind NAT Behind IP Sharing: router function. IP Sharing Public IP Address: Sharing router for SIP Phone to work behind IP sharing. STUN Server address: must enable Behind NAT Device function then inputting STUN Server address. STUN Server you don’t input any port data. Select if enable SIP Phone behind IP Sharing Set Public IP Address of IP If user wants to use STUN function, user...
  • Page 52 (3) SNTP SNTP Mode: function SNTP Server Address: When SNTP server is available, enable SIP Phone SNTP function to point to SNTP server IP address so that SIP Phone can get correct current time. Time Zone-GMT: User can set different time zone according to the location of SIP Phone.

  • Page 53: Sip Configuration

    5.4.2 SIP Configuration (1) SIP Main Configuration Primary Proxy Address and port: item A, please input Primary Proxy address and signaling port of Proxy. Secondary Proxy Address and port: secondary Proxy server and port for backup. Outbound Proxy Address and port: Proxy and port if necessary.

  • Page 54: System Configuration

    5.4.3 System Configuration (1) Feature Configuration: Inter Digit Time: the duration (in second) of two pressed digits in dial mode as timed out. If after the duration user hasn’t pressed next number, SIP Phone will dial out all number pressed. Keypad DTMF Type: SIP Phone transmits.
  • Page 55 (2) Function Key Configuration: Conference : Conference. But now it is not support Server Conference mode yet! Group Pick up: your IP-PBX system administrator. Specific Pick up: with your IP-PBX system administrator. F1: User-defined function key. F2: User-defined function key. F3: User-defined function key.

  • Page 56: Number Configuration

    5.4.4 Number Configuration (1) Phone Book Add Data: User can specify 50 sets of phone book via web interface. Please input index, Name, E.164 number, IP Address, port of the destination device, drop prefix, and insert number. 1. name: Specify name for one pbook data 2.
  • Page 57 (2) Hotline If user set SIP Phone as hotline mode, once SIP Phone is off-hook, it will automatically dials phone number (Proxy Mode) set in hotline table.
  • Page 58 (3) Digit Manipulation add: Add a rule to drop or insert prefix digits of incoming call. prefix: Set which prefix number to implement digit manipulation rule. drop: Enable or disable drop function. If this function is enabled, Phone will drop prefix number on incoming call. insert: Set which digit to insert.

  • Page 59: Media Configuration

    5.4.5 Media Configuration (1) Codec Codec Priority: user can set from 1 to 5 codecs as their need. For example, user can only set first priority as G.723.1, and set the others as x, that means only G.723.1 is available. Packet Size: set codecs priority in order.
  • Page 60 (2) Voice Volume: Adjust the volume of Ringer, Receive (Local side hearing), transmit (remote side hearing), DTMF. Echo Cancelor: Enable / Disable (it is suggested to always Enable this function).
  • Page 61 (3) Tone Configuration Ring Back Tone: Busy Tone: Dial Tone: Set dial tone parameters. Dial Tone: Ring Tone: Set ring back tone parameters. Set busy tone parameters. Set 2 dial tone parameters. Set ring tone parameters.
  • Page 62 (4) Payload Type RFC2833 Payload Type: Change RFC2833 Payload type. This is for special request from the other site, if RFC2833 payload types of 2 sites are different, it may cause some problem of connection.

  • Page 63: Device Management

    5.4.6 Device Management (1) Login Password Change password configuration: or user, then enter current password, new password and confirm new password again to set new password. First select login name as root...
  • Page 64 (2) Software Upgrade Download Mode: TFTP/FTP Server IP Address: Set TFTP server IP address FTP Login: Target File name: Target File Type: Note: After upgrade Application, please remember to execute Flash Clean, which will clean all configurations become factory values except Network settings..
  • Page 65 (3) Provision Server Provision Server Address: Provision Server Login User Name: user ID. Provision Server Login User Password: login user password. Provision Server Cycle time. set Provision server IP address. set Provision Server login set Provision Server Time: set Provision Server update cycle...
  • Page 66 (4) Flash Clean Press CLEAN will clean all configurations except Network Configuration of SIP Phone and reset to factory default value. Note: User must re-configure all commands all over again (except Network Configuration).

  • Page 67: System Status

    5.5 System Status 5.5.1 Network Status Display all current network status of SIP Phone.

  • Page 68: Version Information

    5.5.2 Version Information: Display software version.

  • Page 69: Reboot

    5.6 Reboot Press reboot will reset SIP Phone. Note: To execute reboot via web browser, SIP Phone will automatically save all data before reboot. To execute reboot via TELNET command, please remember to do Commit Data before Reboot System.

  • Page 70: Telnet Command Lines

    1. After setting the IP Address of SIP Phone SP5101 and reboot, (please refer to LCD Menu), user can enter Telnet command lines. press enter to enter command lines. If user Description help/man/? [command] quit/exit/close...

  • Page 71: Help] Command

    6.2 [quit] command Type quit/exit/close will logout SIP Phone SP5101 and Telnet Program. Description help/man/? [command] quit/exit/close show debug message reboot local machine Phonebook information and configuration commit flash rom data test that a remote host is reachable...

  • Page 72: Debug] Command

    6.3 [debug] command This command is for engineers to debug system of SIP Phone SP5101. User can add debug flag via command debug –add “debug flags”, and then start debug function via command debug –open. When SIP Phone SP5101 is working on screen will display related debug messages.

  • Page 73: Commit] Command

    The message will display packets transmitting condition or no answer from the IP address. 6.8 [time] command When SIP Phone SP5101 enable SNTP function and be able to connect with SNTP server, type time command will show the current time retrieved from SNTP server.

  • Page 74: Ifaddr] Command

    8. –timeformat: Set time display format as 12 or 24 hours. (ifaddr –timeformat 0/1, 0 as 24 hours, 1 as 12 houts) 9. -ipsharing: If SIP Phone SP5101 is behind a IP-sharing , user must enable IP sharing function and specify public IP address.(ifaddr –ipsharing 0/1 “public IP address of IP sharing”...

  • Page 75: Pppoe] Command

    11. –id: Input ID of Provision server. 12. –pwd: Input Password of Provision server. 13. –emstime: Set provision cycle time. 14. –stun: Input STUN server address. (ifaddr –stun 1 61.220.2.2) But you must take notice when you use this function, you must enable “ipsharing”...

  • Page 76: Flash] Command

    SIP Phone SP5101. 2. To execute the command flash –clean, all configuration of SIP Phone SP5101 stored in flash will be cleaned. It is authorized for the user whose login name is “root” only.

  • Page 77: Sysconf] Command

    6.12 [sysconf] command 1. -print: display all current configurations. 2. -idtime: set the duration(in second) of two pressed digits in dial mode as timed out. If after the duration user hasn’t pressed next number, SIP Phone will dial out all number pressed. 3.

  • Page 78: Sip] Command

    SIP Phone will set out as of Proxy”. This function is for special proxy server. 7. –line: identify one number for the SIP Phone SP5101 to register to the Proxy (SIP –line “line number”). Note: In proxy mode please remember to set user account information under security command.

  • Page 79: Security] Command

    [security] command 1. –print: display all current configurations. 2. -name: set user ID of SIP Phone SP5101 for registering. User can set user name and password for registering. If password is no need, please set user name the same as line number or SIP Phone won’t register successfully.

  • Page 80: Line] Command

    6.15 [line] command –print: display all current configurations. –fwd: set forward function. There are 3 selections in Forward type, user must select under which condition to forward calls. 6.15.1 Busy Forward When SIP-Phone is in busy status, the incoming call will be forwarded to the assigned phone number.

  • Page 81: Voice] Command

    6.16 [voice] command The voice command is associated with the voice codec setting information. 1. -print: display voice codec information and configuration. 2. -send: three voice packet size can be configured as 20 ms, 40 ms or 60 ms.(only 30 and 60 ms for G..723.1) 3.

  • Page 82: Tos] Command

    tone, rbt: ring back tone, bt: busy tone, dt: dial tone). This parameter should be accompanied with tone type. -ring: To set RING tone value. The played tone type, when Phone ha incoming call. -rbt: To set Ring Back Tone value. The played tone type, when Phone dials out a call.

  • Page 83: Prefix] Command

    1. High priority with DS-field. Expected Forwarding (EF) Assured Forwarding (AF) 2. Low Priority with DS-field: Assured Forwarding (AF) 1. -print : display all current configurations. 2. –rtptype: set DSCP value of signaling packets from 0 to 63 3. –siptype: set DSCP value of RTP packets from 0 to 63 Note: This command won’t be functional until whole network environment support DSCP function, e.g.

  • Page 84: Rom] Command

    drop: Enable or disable drop function. If this function is enabled, Gateway will drop prefix number on incoming call. insert: Set which digit to insert on incoming call. Example: prefix -add prefix 100 drop 1 insert 2000 2. -modify: Modify a rule to drop or insert prefix digits of incoming call. Example: prefix –modify 100 drop 0 insert 200 3.

  • Page 85: Auth] Command

    TFTP server is 192.168.1.1, User has to input command as below: rom –app –s 192.168.1.1 –f lpsip.100 Command rom –print can show current version installed in SIP Phone SP5101. 6.21 [auth] command For security concern, the “root” user can customize some configurable items for “administrator”...

  • Page 86: Passwd] Command

    6.22 [passwd] command For security protection, user has to input the password before entering application user/config mode. Two configurations of login name/password are supported by the system. –set: set password of “root” users or “administrator” users. (passwd –set root/administrator “password”) –clean: clean up password restored before, and user can login :”root/administrator”, password: ”press enter”.

Table of Contents