Table of Contents
Advertisement
the bell chiming turn on and if you listen carefully you should hear a
whistle blast sound after three seconds have passed at which time you can
release the bell button. (
hear, we recommend that you count out a full three seconds before
releasing the bell button.) The bell will continue to chime, so if you want to
turn off the bell ringing, simply press and release the bell button a second
time. If you were in neutral when you triggered the brake feature, interrupt
the transformer throttle to enter either forward or reverse to allow the
engine to begin running. (
first direction state you enter after triggering the feature from the neutral
position. You cannot interrupt the power twice to enter another direction
state and still have the passenger sound feature active.) Once your engine
begins running, you can trigger the sounds to begin playing whenever you
enter neutral.
Option 2
If you do not have a separate bell button on your layout, you can
still activate the feature with your transformer whistle button. To activate
the feature turn on the transformer throttle and get your engine into the
neutral position (not RESET). Once in neutral, set the transformer throttle
at 8 volts or less and press and hold the whistle button for at least three
seconds. You will hear the bell chiming turn on and if you listen carefully
you should hear an whistle blast sound after three seconds have passed at
which time you can release the whistle button. (
blast sound is hard to hear, we recommend that you count out a full three
seconds before releasing
the whistle button. ) The
bell will continue to chime,
so if you want to turn off
the bell ringing, simply
press and release the bell
button a second time.
Interrupt the transformer
throttle to enter either
forward or reverse to allow the engine to begin running. (
will only be activate in the first direction state you enter after triggering
the feature from the neutral position. You cannot interrupt the power twice
to enter another direction state and still have the feature active.) Once your
engine begins running, you can trigger the sounds to begin by entering
neutral.
because the whistle blast sound is hard to
Note:
Note:
the feature will only be activated in the
Put Engine In Neutral
At Low Power
The Whistle Button
11
RailKing Camelback 4-6-0
Note:
because the whistle
Listen For The
Start Of The Bell Sound
H
Press & Hold
For 3 Seconds
Note:
Listen For The
Whistle Blast Sound
After 3 Seconds
the feature
Advertisement
Table of Contents
