Network Settings; Local Network (Lan) - Loopcomm LP-8096 User Manual

Network Settings

Local Network (LAN)

These settings are for your local network only and do not apply to your
Internet / ISP connection.
IP Address: The IP address of the Dual Band Wireless Router.
Subnet Mask: The subnet of the Dual Band Wireless Router.
Default Gateway: The access point to another network.
DHCP: Each network device on your local network will have its own IP Address. The DHCP server automatically assigns the IP
addresses to each device connected to your network. Disabling DHCP will require that each device on your network be assigned a
manual or static IP address.
DHCP Client Range: The range of IP addresses provided by the DHCP server is defined by this field. You can limit how many IP
addresses are used in your network by setting a smaller or larger range.
DHCP Lease Time: The amount of time each device is given a specific IP is decided by the DHCP lease time. After the Lease
Time expires, the DHCP server will assign another IP address to the device.
Set Static DHCP: This allows specific devices to be given a specific IP address each time the device connects to the network. The
DHCP server will always assign the same IP address to the same device. This feature is often used for shared devices such as
network printers or servers.
Copyright © 2014 Loopcomm Technology Inc. All rights reserved.